WARNING • Instruct the Owner to keep all power turned OFF until corrective action can be achieved by a NABCO trained technician. Failure to follow these practices may result in serious consequences. • NEVER leave a Door operating without all Safety detection systems operational.
GT1175 U-19 Electric Lock Retrofit Kit Quick Setup Parts Guide www.NabcoEntrances.com P/N C-00299 Rev 2-15-18 SECTION 1: Retrofit the Belt Clip Note: Electric Locks can not prevent Breakout. If preventing Breakout is deemed necessary, panic hardware must be fitted to the Door Panels.
www.NabcoEntrances.com GT1175U-19ElectricLockRetrofitKitQuickSetupPartsGuide Rev2-15-18 P/NC-00299 SECTION 2: Install the Electric Lock 1. Insert (2) 3/8 -16 x 3/4 inch T-Bolts into the Channel located inside Header and turn clockwise so they do not fall out. Insert T-Bolt into Channel Turn T-Bolt Clockwise Figure 3 Insert Socket Head Cap Screws into Channel to Lock into Channel DN 0738 2. Obtain the Electric Lock provided within the Electric Lock Retrofit Kit.
GT1175 U-19 Electric Lock Retrofit Kit Quick Setup Parts Guide www.NabcoEntrances.com P/N C-00299 Rev 2-15-18 SECTION 4: U19 with Fail Secure or Fail Safe Electric Lock Note: Electric Lock only works in One Way mode or Night Mode. 4 of 5...