EnvironmentalLights.com 5-in-1-Remote Product Manual

EnvironmentalLights.com 5-in-1-Remote Product Manual

Advertisement

5-in-1 Remote and Receiver Manual
Part numbers: 5-in-1-Remote/5-in-1-Receiver/RGBTW-3030-LW-48-
24-1m
The 5-in-1 Wireless Remote can control up to 8 zones of LED lighting when paired with the 5-in-1 Wireless Receiver or the
LumenWash LED Wall Washer. The 5-in-1 Wireless Receiver is designed for use with our 5-in-1 RGB LED Strip Light. It works with
monochrome, Tunable White, RGB, RGB ColorPlus and 4-in-1 LED Strip light as well. The 5-in-1 Wireless Remote features 9-preset
modes and controls each zone independently from one another. Set any color of RGB with the color wheel, then blend the additional
two white channels for the perfect color mix. The 5-in-1 Wireless Remote has a range of 30 meters in an ideal environment.
Features
Wirelessly controls up to 8 separate zones
9 preset modes
Works with monochrome up to 5-in-1 LED Strip Light
30-meter range
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
Applications
© EnvironmentalLights.com
Product Manual
Great for testing functions of 5-in-1 LED Strip Light
For use in 5-in-1 Strip Light and LumenWash LED Wall
Washer applications.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5-in-1-Remote and is the answer not in the manual?

Questions and answers

Summary of Contents for EnvironmentalLights.com 5-in-1-Remote

  • Page 1 For use in 5-in-1 Strip Light and LumenWash LED Wall • Works with monochrome up to 5-in-1 LED Strip Light • Washer applications. 30-meter range • EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © EnvironmentalLights.com...
  • Page 2 For 4 channel control, connect red to R, green to G, blue to B, and the white to W. The positive wire connects to the V+ terminal. Once connected, press the switch button until the indicator light shows green. EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © Environmental Lights...
  • Page 3 For single color, connect each wire to a separate channel on the receiver. The positve wire connects to the V+ terminal. Once connected, press the switch button until the indicator light shows white. EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © Environmental Lights...
  • Page 4 Press the button five times on the corresponding zone within three seconds of reapplying power. The lights will blink ten times to indicate a successful unlink EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © Environmental Lights...
  • Page 5 Single Color/Tunable White Modes White fade in and out White blinking White fade in and out and three blinks Table 2: Single Color/Tunable White modes EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © Environmental Lights...
  • Page 6 Once you have tested the system successfully, you are ready to install it. We recommend you install LEDs, electronic controls and dimmers in such a way that you have access to them in case they fail. All electrical components can fail. EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127 © Environmental Lights...

This manual is also suitable for:

5-in-1-receiverRgbtw-3030-lw-48- 24-1m

Table of Contents