Download Print this page

EnvironmentalLights.com SFR-XX-W-20 Manual

24 volt single color super flat led rope

Advertisement

Quick Links

11235 West Bernardo Court, Suite 102
San Diego, CA 92127
888-880-1880
Fax: 707-281-0567
EnvironmentalLights.com
24 Volt Single Color Super Flat LED Rope
Part Numbers: SFR-XX-W-20, SFR-XX-B-20
LED Super Flat Rope from Environmental Lights is a unique and special product you probably
won't find anywhere else. It is rugged and waterproof, like LED rope, but is more compact and
brighter. The face of the LED rope has a mask that hides the circuitry, so all you see is the LEDs.
This mask is either white or black and matches the color of the sidewalls and back. Select either
white or black finish (mask and sidewalls.) Single Color Super Flat Rope uses 60 very bright
5050 (5.0 mm square) triplex LEDs. Best of all, Super Flat Rope is available in many colors and
can be used in 20 meter (65.7 feet) lengths—just be sure to apply power to both ends.
It is easy to customize and create impressive large scale effects using Super Flat LED Rope.
Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Or
use any DMX controller, in conjunction with any of our decoders. This is a fantastic product for
commercial, studio, architectural and decorative purposes.
Based on the needs of the project, the length of Super Flat LED Rope can be customized. We
provide all the tools, accessories, and instructions that are needed to customize your project.
Channel for Single Color Super Flat LED Rope is easy to install. Simply use screws to mount the
channel and then insert the Super Flat LED Rope.
Copyright EnvironmentalLights.com
All Rights Reserved 12/13/18

Advertisement

loading
Need help?

Need help?

Do you have a question about the SFR-XX-W-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EnvironmentalLights.com SFR-XX-W-20

  • Page 1 EnvironmentalLights.com 24 Volt Single Color Super Flat LED Rope Part Numbers: SFR-XX-W-20, SFR-XX-B-20 LED Super Flat Rope from Environmental Lights is a unique and special product you probably won't find anywhere else. It is rugged and waterproof, like LED rope, but is more compact and brighter.
  • Page 2: Specifications

    • Cut LED Super Flat Rope is not returnable. Caution • Use only factory-recommended connectors and accessories. • Do not operate in more than 45°C (110°F) ambient temperature. • Do not operate light when ambient temperature is below 0°C (32°F). Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 3: Assembly And Installation

    Dotted lines on the back side of the rope indicate where cuts can be made. Be sure your cut is a straight line, perpendicular to the rope light, as shown below. 100mm (3.94”) Minumum Cut Length for Whites, Green, Blue, Pink: 167mm (6.57”) Red, Orange, Amber: Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 4 4. Make sure to insert pins in the correct direction. The 01 and 02 Front Connectors are mirrored in terms of the direction of pins. Always check the functionality after inserting a connector and before sealing the connection to ensure that the proper directionality has been achieved. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 5 5. Connecting your accessories properly is key to maintaining the lifetime of the LED lights. 20 meter reels will be received with a front connector fully sealed onto each end. 6. Below are the instructions for assembling the snap connector series. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 6 Insert the placement tool on the back side of the PCB and gently move the tool side to side to create enough space for the connector pins. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 7 Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 8 Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 9 Follow the same steps for assembling a snap end cap: Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 10 7. Proper assembly of the 40 series accessories. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 11 Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 12 8. Proper assembly of 40 series end cap. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 13 9. When using the aluminum U-channel, use screws to mount the U-channel, then install the super flat rope into the channel. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...
  • Page 14 Once you have tested the system successfully, you are ready to install it. We recommend you install LEDs, electronic controls and dimmers in such a way that you have access to them in case they fail. All electrical components can fail. Copyright EnvironmentalLights.com All Rights Reserved 12/13/18...

This manual is also suitable for:

Sfr-xx-b-20