Page 2
Discoloration of some towels may occur — this could be the result of fabric makeup, detergent residue, or if too many towels are placed on the towel warmer. For these reasons amba products cannot be held liable for any damage to towels. Consider the option of using a digital heat controller for delicates, acrylics, or nylon —...
Page 3
It is also possible to use a solvent — use caution & make sure to read the technical forms and norms for it’s use • In case of uncertainty, do not hesitate to contact Amba Products Amba Products declines any responsibility if these instructions are not followed...
Page 4
INSTALLATION CAUTION: DO NOT TAKE OFF THE PROTECTIVE P.V.C. TAPE BEFORE INSTALLING TOWEL WARMER TO INSTRUCTIONS AVOID SCRATCHING, MARKING OR GRAZING THE SURFACE. Threaded STEP 1 STEP 2 Drywall Wall Support Brick Wall Fixing Screw Plastic Anchor Threaded Fastener Plastic Anchor Washer Brick wall:...
Page 5
Built-in DIGITAL HEAT CONTROLLER STEP 1 OPERATIONAL INSTRUCTIONS INCREASE POWER LEVEL POWER LEVEL DISPLAY DECREASE POWER LEVEL On-OFF TOGGLE TOUCH CONTROLS WORK BY A LIGHT TOUCH OF YOUR FINGER TIP After switching on unit wait a few seconds for the self Calibration (lights up in circular movement); Choose from 9 different heat levels.
Need help?
Do you have a question about the Elory E2830 and is the answer not in the manual?
Questions and answers