Cablematic PC-24A Operation Manual

CONDENSATE PUMP
OPERATION MANUAL
Please read this instruction carefully before using this product,
and keep this manual carefully for future reference
CONDENSATE PUMP
Thank you for buying your condensate pump. This manual gives instructions on the
correct installation. It is important that you follow these instructions carefully.
1.Important notes
1. Before carrying out any operation on the pump, make sure the installation is disconnected from
the power supply.
2. The pump has been evaluated for use with water only.
3. Risk of electronic shock. This pump has not been investigated for use in swimming pool or
marine areas.
4. If the cord is damaged, it must be replaced with a special cord or assembly available from the
manufacturer or it's service agent.
5. Do not run this pump dry.
6. Always ensure the metal magnet in the float is facing upward. Always ensure the reservoir is
sitting flat and horizontal.
7. The pump is ideal for most working and living environments. It is not recommended where the
environments is oily or particularly dusty.
8. Acceptable for indoor use only.
9. This condensate pump is non- submersible
2.Pump component
Inlet Port
Power Supply
PCB
Float
02
CONDENSATE PUMP
3. Dimension drawing
4. Technical specification
Model
Voltage
Discharge head
Rated
Flow rate
Tank capacity
Outlet Port
Mini splits up to
Sound level
Motor
Ambient temperature
Reserovir
PC-24A PC-40A
100-230V~/50-60Hz 100-230V~/50-60Hz
10m
10m
Non continuous Non continuous
24L/h 40L/h
200ml 200ml
8KW(30,000tu/hr) 15KW(45,000tu/hr)
19dbB(A)
21dbB(A)
0℃~50℃
0℃~50℃
03