Advertisement
Quick Links
NOTE:
1. If electrical power is interrupted at any time, unit will turn OFF. Internal rechargeable
battery will continue to light display.
2. After power is restored, to re-activate unit and re-start programmed timing, press
START.
3. During any interruption of electrical power, count up time elapsed will return to 00.00.
Programmed time will remain on display.
OPERATIONAL DIFFICULTIES, WARRANTY, OR SERVICE
If this unit does not function properly for any reason, or for questions regarding warranty or
service, contact:
TRACEABLE® PRODUCTS
12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail support@traceable.com • www.traceable.com
Traceable
Products is ISO 9001:2018 Quality-
®
Certified by DNV and ISO/IEC 17025:2017
accredited as a Calibration Laboratory by A2LA.
Cat. No. 5057
®
Traceable
is a registered trademarks of Cole-Parmer.
©
2020 Traceable
Products.
®
92-5057-00 Rev. 4 070920
TRACEABLE
WALKAWAY™
CONTROLLER
INSTRUCTIONS
®
Advertisement
Related Manuals for Traceable Walkaway 5057
Summary of Contents for Traceable Walkaway 5057
- Page 1 TRACEABLE TRACEABLE® PRODUCTS 12554 Old Galveston Rd. Suite B230 Webster, Texas 77598 USA WALKAWAY™ Ph. 281 482-1714 • Fax 281 482-9448 E-mail support@traceable.com • www.traceable.com CONTROLLER Traceable Products is ISO 9001:2018 Quality- ® Certified by DNV and ISO/IEC 17025:2017 INSTRUCTIONS accredited as a Calibration Laboratory by A2LA.
- Page 2 Case: high-impact, ABS plastic 6. Press and hold 4/SET button for three seconds. Display will flash. Cat. No.: 5057 – Traceable Count Up Walkaway Controller ® ™ 7. Press buttons 1, 2, 3, and 4 to set desired time. Press and hold to advance setting rapidly.
Need help?
Do you have a question about the Walkaway 5057 and is the answer not in the manual?
Questions and answers