Table of Contents
Advertisement
Operating the product
Tablet detergent function
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
C
If you have used the Tablet
features during the last washing
programme you used, Tablet
function will remain active in
the next washing programme
you will select.
C
Tablet Detergent function may
cause change in the programme
duration.
Auto Door Open
(depends on the model)
Thanks to the "Auto Door Open" feature of
the product, drying efficiency is increased
and energy saving is provided. There are
two options: "o:0" "OFF" and "o:1" "ON"
To modify the "Auto Door Open" options use
the sub menu settings.
When you enable this function, the door of
your machine will be opened automatically
at the end of the programme.
C
Auto Door Open feature,
opens the door using the "door
opening shafts"
This action takes approx. 2
minutes. In case of a power loss
during the egress of the shafts,
do not force close the door.
After power is restored, the
process will be completed and
the shafts will be retracted.
30
/42 EN
Interior Lighting
(Depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1.
After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press until
the countdown 3, 2, 1 is completed on
the display.
2. Press P+ key to activate the L: option.
The interior lighting is turned off at
"L:0" option and turned on at "L:1"
option. Set the desired option with the
Time Delay key.
3. Turn off the machine with On/Off key
to save the changes.
Changing Warning Sound Volume
1.
After switching on your machine, press
the Menu key for 1 second.
2. Press <- and +> to proceed to "S:" on
the display.
3. Each pressing on the Selection key will
change the warning sound volume as
"S:0" off, "S:1" medium and "S:2" high.
4. Press the Menu key to exit the settings
menu. Your setting will be saved
automatically.
C
Your machine is set to
"S:2" as factory default.
Dishwasher / User's Manual
Advertisement
Table of Contents
