North American Tool Industries 9409 Important Operating Instructions

Paint spray gun

Advertisement

PAINT SPRAY GUN
DO NOT RETURN TO STORE
Please call 800-348-5004 for
parts and service
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information
For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com
is available at all times. If you
give the equipment to any other
person, give them these
operating instructions as well.
We accept no liability for
damage or accidents which
arise due to non-observance of
these instructions and the
safety information herein.
SPECIFICATIONS
Standard Nozzle: 2.0mm
Avg. Air Consumption: 7 CFM
Air Pressure: 50-90 PSI
Pattern Width: 9 inch
Paint Capacity: 32 oz.
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS GENERAL
PURPOSE SPRAY GUN.
Any failures made in
following the safety
regulations and instructions
may result in an electric
shock, fire and/or serious
injury.
1
Model: 9409
SAFETY
INSTRUCTIONS
Keep work area clean and
well lit. Cluttered, dim work
areas invite accidents.
Observe work area
conditions. Do not use the
tool in the presence of flames
or flammable liquids, gases,
or dust.
Keep children away.
Children must never be
allowed in the work area. Do
not let them handle
machines, tools, extension
cords, or air hoses.
Store idle equipment. When
not in use, the tool should be
stored in a safe, dry location
out of the reach of children.
Use the right tool for the
job. Do not attempt to force a
tool or attachment to do a job
that it was not intended to do.
The tool will do the job better
and safer at the rate at which
it was intended.
Dress properly. Do not wear
loose clothing or jewelry as
they can be caught in moving
8809409
02/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9409 and is the answer not in the manual?

Questions and answers

Summary of Contents for North American Tool Industries 9409

  • Page 1 Model: 9409 PAINT SPRAY GUN DO NOT RETURN TO STORE is available at all times. If you SAFETY give the equipment to any other Please call 800-348-5004 for INSTRUCTIONS person, give them these parts and service Keep work area clean and operating instructions as well.
  • Page 2 parts. Protective, electrically that appears damaged should be area with hot, soapy water. non-conductive clothes and carefully checked to determine Check all spray gun seals and non-skid footwear are that it will operate properly and connections. Before use, make recommended when working. perform its intended function.
  • Page 3 atomization can easily be obtained by regulating the pattern adjusting knob and fluid adjusting knob. 1. Adjusting pattern: • Turn the pattern adjusting knob to the left will make the spray pattern wider. 2. Adjusting the volume of fluid output: •...
  • Page 4 Symptom Possible Cause(s) Corrective Action Paint Breaking Air gets mixed with paint in the paint Replace O-Ring with a new one passage caused by the needle packing or tighten the packing screw being worn out Tighten air cap Loose air cap Air mixing caused by a loosening of Tighten the coupling nut the coupling nut of the paint cup...
  • Page 5 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 6 GENERAL PURPOSE SPRAY GUN Model: 9409 For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com 8809409 02/13...
  • Page 7 Description Description Air Cap Set Nipple Fluid Nozzle Fluid Joint Gun Body Screw Cap Trigger Stud Fastener Stop Ring Cup Locking Lever Pattern Control Knob Cup Cover Fluid Control Knob Liquid Tube Needle Spring Cup Cover Gasket Needle Packing Screw Needle Packing Ring Trigger Valve Assembly Air Valve Packing Ring...

Table of Contents