Instruction manual / Temp / RH Monitor models -700 Product may vary from picture. To ensure safety, please read this manual carefully before installation and follow the instructions herein. Store this manual in a secure place for future reference ...
Chart display shows the current software version & “Warm Up” Main display shows a countdown from 10 Once the countdown is complete, your product is ready to use. No initial setup or calibration is needed. 1. Deploy the Stand 2.Plug in USB Power Cable www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...
7. Audible Alarm On/Off 16. Good Zone Indicator CO2, Temperature, RH Readings The device has three built-in main measureable parameters: ambient carbon dioxide(12), temperature (9), and RH (11). They are constantly displayed on screen. www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...
(5). As the Zoom Level is changed, the Max and Min values will reflect the maximum and minimum values on the chart of the selected parameter(CO2; Temp and RH). At startup, the unit will automatically display values for CO2. LED Display at Plant Mode www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...
Below is a table showing what main menu selection is made by pressing MENU multiple times as well as their functions. Note that the device will display “Done,” followed by the confirmed selection if selected correctly. Function Directions ALARM By default , an audible alarm will resound if the CO2 level exceeds www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...
Page 6
Yes, then press and hold ENTER for 3 seconds until an audible beep Select NO to exit the main menu. (Return) Exits the main menu. No options will be displayed on the green bar. A different audible beep be heard in this option. www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...
±0.1% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C Pressure Dependence 0.13% of reading per mmHg (corrected by user’s altitude input) Response Time <2min for 63% of step change or <4.6min for 90% step change Warm-up Time <30 sec Temp Measurement www.iCeeO2.com iCeeO2-700_A009D_US_076c.UserMan.doc...