Solo SR Style DIY Disassembly Manual

Electric bass guitar kit

Hide thumbs

page of 9

/ 9
Bookmarks

Quick Links

Download this manual

Solo SR Style DIY

Electric Bass Guitar Kit

Assembly Manual

SRBK-1

V 1.02

Need help?

Do you have a question about the SR Style DIY and is the answer not in the manual?

Questions and answers

Summary of Contents for Solo SR Style DIY

Page 2 Solo SR Style DIY Electric Bass Guitar Kit Materials List  Bushings for tuners (4 pcs)  Neck  Tuning Machines (4 pcs, 4 mounting screws & 4 washers)  Strings (4 pcs)  Strap Buttons (2 pcs, 2 mounting screws included) ...
Page 3: Tools And Materials Needed
Solo SR Style DIY Electric Bass Guitar Kit Thank you for purchasing a Solo DIY guitar kit. This unfinished guitar kit has everything for building an electric bass guitar – you will need only some basic tools and finishing supplies. All challenging wood cutting, drilling and shaping is already professionally done, as well as fret leveling and dressing.
Page 4 Solo SR Style DIY Electric Bass Guitar Kit finishing. DO NOT SAND THE FINGERBOARD. For sanding both neck and body, use a flat sanding block for all flat surfaces and by hand for edges and rounded/curved surfaces. Start with 180 grit sandpaper, continue with 240 and finish with 320, always moving along the grain only.
Page 5 Solo SR Style DIY Electric Bass Guitar Kit STEP 2 - Attach the neck to the body using 4 screws with a neckplate and a setter. This step can be performed later as you may find it easier to assemble the body without the neck.
Page 6 Solo SR Style DIY Electric Bass Guitar Kit 6. TUNING AND SETUP The open strings of a regular bass guitar, from the thickest to thinnest, in standard tuning are: • B (1st octave) – the thickest (or lowest sounding) string - is the 5th string •...
Page 7 Solo SR Style DIY Electric Bass Guitar Kit The height at the first fret can be adjusted by cutting deeper slots for strings at the nut. However, it needs a very precise job not to spoil the nut. If you are not sure that you can do it properly, stay with a factory pre-cut nut.
Page 8 Solo SR Style DIY Electric Bass Guitar Kit some higher frequencies. It’s not necessary to maintain an even height of the pickup – you may find it more satisfactory sounding by setting it somewhat angled, depending on what you are looking for in the output sound.

This manual is also suitable for:

Srbk-1