Alpine A110 2021 Manual
  1. Manuals
  2. Brands
  3. Alpine Manuals
  4. Automobile
  5. A110 2021
  6. Manual

Alpine A110 2021 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A110 2021 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alpine A110 2021

Summary of Contents for Alpine A110 2021

  • Page 3 Welcome to your new vehicle This driver’s handbook contains the information necessary: – for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and the technical developments it incorporates. –...
  • Page 5 Sections Getting to know your vehicle ....... Driving ..............Your comfort ............Maintenance ............Practical advice ............ Technical specifications ........Alphabetical index ..........

  • Page 7: Table Of Contents

    Section 1: Getting to know your vehicle Card: general information, use, deadlocking ......... . . Opening and closing the doors .
  • Page 8 CARD: general information (1/3) The card is used for: Battery life – locking/unlocking the doors and Make sure that the correct battery type tailgate (doors, tailgate) and the fuel is being used, and that the battery is filler flap (see the following pages); in good condition and inserted cor- rectly.
  • Page 9 CARD: general information (2/3) Integrated key 5 The built-in key is used to lock or unlock the front left-hand door if the card is not working: – when the card battery is drained, flat battery, etc. Driver’s responsibility – use of devices using the same fre- when parking or stopping quency as the card;...
  • Page 10 CARD: general information (3/3) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone on your vehicle, even for a short time. They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or locking the...
  • Page 11 “HANDS-FREE” CARD: use (1/4) Using the card in hands-free There are two ways to unlock/lock the Note: The vehicle cannot be locked vehicle: again for three seconds after unlocking mode – the card in “hands-free” mode; by pressing button 3. –...
  • Page 12 “HANDS-FREE” CARD: use (2/4) Interference Interference by factors in the immediate vicinity (external installations or the use of equipment operating on the same frequency as the card) may disrupt its operation. Special features of the unlocking system After three days of inactivity, unlocking by pressing button 3 or 4 is disabled.
  • Page 13 “HANDS-FREE” CARD: use (3/4) Special features of the locking If an opening element (door, luggage The vehicle cannot be locked if the card system compartment or bonnet) is open or not is within the zone 6. properly closed, when locking by press- After locking by pressing the 3 or 4 “Hands-free”...
  • Page 14 “HANDS-FREE” CARD: use (4/4) Locking using the card With the doors, luggage compartment and bonnet closed, press button 8: the vehicle locks. The indicator lights and hazard warning lights flash twice to indicate that the Driver’s responsibility doors have locked. when parking or stopping Note: the maximum distance at which the vehicle...
  • Page 15 REMOTE CONTROL CARD: use Locking the doors and Unlocking/locking the rear luggage compartment luggage compartment only Press the locking button 2. The hazard Press button 4 to unlock/lock the rear warning lights flash twice to indicate luggage compartment. that the vehicle is locked. If one of the opening elements (door, luggage com- card not detected alarm partment lid, bonnet) is open or not...
  • Page 16 CARD: deadlocking If the vehicle is equipped with a dead- Vehicle with card Special note: deadlocking is not pos- locking function, this allows you to lock sible if the hazard warning lights or the Press button 1 twice in quick succes- the opening elements and to prevent side lights are lit.

  • Page 17: Opening And Closing The Doors

    OPENING AND CLOSING THE DOORS (1/2) Door/tailgate open buzzer If an opening element (door, luggage compartment or bonnet) is open or  poorly closed, the warning light appears on the instrument panel. As soon as the vehicle reaches approxi- mately 6 mph (10 km/h), the message “Boot open”...
  • Page 18 OPENING AND CLOSING THE DOORS (2/2) Operating faults Driver’s responsibility In the event of a battery fault: when parking or stopping the vehicle – to open the door: pull the handle 1 Never leave an animal, then open the door with care to avoid child or adult who is not self-suffi- damaging the seal 4;...
  • Page 19 LOCKING, UNLOCKING THE DOORS (1/2) Locking/Unlocking the doors from the outside This is done using the card: refer to “Cards” in section 1. In certain cases, the card may not work: – when the card battery is drained, flat battery, etc. –...
  • Page 20 LOCKING, UNLOCKING THE DOORS (2/2) Locking the doors without Door and tailgate status the card indicator For example, in the event of a dis- When the ignition is on, the indicator charged battery or the card temporarily light integrated in switch 4 informs you not working, etc.

  • Page 21: Automatic Locking When Driving

    AUTOMATIC LOCKING WHEN DRIVING Activating/deactivating the function With the engine running, press the button 1 for approximately 5 seconds, until you hear a warning beep. Operating faults If you experience an operating fault (no automatic locking, the indicator light incorporated in button 1 does not light up when trying to lock the open- ing elements, etc.), firstly check that the opening elements are properly closed.

  • Page 22: Steering Wheel/Power-Assisted Steering

    STEERING WHEEL/POWER-ASSISTED STEERING Power Assisted Steering Variable power assisted steering The variable power-assisted steering system is equipped with an electronic control system which alters the level of assistance to suit the vehicle speed. Steering is made easier during parking manoeuvres (for added comfort) while the force needed to steer increases progressively as the speed rises (for enhanced safety at high speeds).

  • Page 23: Front Seats

    FRONT SEATS (1/2) To raise or lower the seat Move lever 2 as many times as neces- sary upwards or downwards. The presence and number of the ad- justments depend on the vehicle and the type of the seat. To move the seat forwards or backwards Lift handle 1 to unlock the seat.
  • Page 24 FRONT SEATS (2/2) Operating faults When an operating fault is detected, the integrated warning lights on the switch 4 for the seat concerned flash. Consult an approved dealer. To tilt the seatback Heated seats Turn the control knob 3 and tilt the seat- With the ignition on: back to the desired position.

  • Page 25: Seat Belts

    SEAT BELTS (1/3) Always wear your seat belt when trav- Before starting, first adjust your driv- elling in your vehicle. You must also ing position, then ask all occupants to adjust their seat belts to ensure comply with the legislation of the par- ticular country you are in.
  • Page 26 SEAT BELTS (2/3) ß Seat belt reminder warning light This appears on the instrument panel when the engine is started if the driv- er’s seat belt is not fastened (if the seat is occupied). If the seat belt is not fas- tened while the vehicle is moving at a speed over 12 mph (20 km/h), the warning flashes and an audible warn-...
  • Page 27 SEAT BELTS (3/3) – No modification may be made to the component parts of the originally fitted restraint system: seat belts, seats and their mountings. For special operations (e.g. fitting child seats), contact an authorised dealer. – Do not use devices which allow any slack in the belts (e.g. clothes pegs, clips, etc.): a seat belt which is worn too loosely may cause injury in the event of an accident.

  • Page 28: Methods Of Restraint In Addition To The Front Seat Belts

    METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/6) Depending on the vehicle, they will con- – Have the entire restraint sist of: system checked following – front seat belt inertia reel preten- an accident. sioners; – No operation whatso- –...
  • Page 29 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (2/6) Load limiter driver and passenger front Airbags Above a certain severity of impact, this mechanism is used to limit the force of Fitted to the driver and passenger the belt against the body so that it is at sides.
  • Page 30 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (3/6) Operating faults Operation å This system is only operational when This warning light 2 will light up the ignition is switched on. on the instrument panel when the igni- In a severe frontal impact, the airbags tion is switched on and then go out after inflate rapidly, cushioning the impact...
  • Page 31 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (4/6) The following conditions will trigger In the event of a frontal impact with In a side impact with another vehicle the pretensioners or airbags. another vehicle of an equivalent or of an equivalent or higher category, at higher category, with an impact area an impact speed equal to or greater...
  • Page 32 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (5/6) In the following examples, the pre- In the following examples, there is a – side impact to the front or rear of the tensioners or the airbags could op- risk that pretensioners orairbags may vehicle;...
  • Page 33 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (6/6) All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. Warnings concerning the driver’s airbag –...

  • Page 34: Additional Methods Of Restraint

    ADDITIONAL METHODS OF RESTRAINT All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. The airbag is designed to complement the action of the seat belt.

  • Page 35: Child Safety: General Information

    CHILD SAFETY: General information (1/2) Carrying children Please ensure that you comply with the legislation of your country. Children, and adults, must be correctly seated and strapped in for all journeys. The children being carried in your vehi- cle are your responsibility. Driver’s responsibility A child is not a miniature adult.
  • Page 36 CHILD SAFETY: General information (2/2) Using a child seat Set a good example by always fas- The level of protection offered by the tening your seat belt and teaching child seat depends on its ability to re- your child: strain your child and on its installation. –...

  • Page 37: Choosing A Child Seat

    CHILD SAFETY: choosing a child seat Rear-facing child seats Forward-facing child seats Booster cushions A baby’s head is, proportionally, heavier The child’s head and abdomen need to From 15 kg or 4 years, the child can than that of an adult and its neck is very be protected as a priority.

  • Page 38: Child Seat Mounting

    CHILD SAFETY: Child seat mounting Attachment via the seat belt Check that the seatback The seat belt must be adjusted to of the forward-facing child ensure that it is effective in the event of seat is in contact with the harsh braking or an impact.

  • Page 39: Fitting A Child Seat, General Information

    CHILD SAFETY: fitting a child seat: general information Some seats are not suitable for fitting In the front seat After installing the child seat, you can child seats. The diagram on the follow- move the vehicle seat if necessary. For The laws concerning children travel- ing page shows you how to attach a a rear-facing child seat, do not let it...

  • Page 40: Child Seat: Attachment By Seat Belt

    CHILD SEATS: attachment by seat belt (1/3) The table below summarises the information already shown in the diagram on the following pages, to ensure the appli- cable regulations are respected. Front passenger seat With airbag disabled With airbag activated Type of child seat Weight of the child With seat Without seat...
  • Page 41 CHILD SEATS: attachment by seat belt (2/3) X = Seat not suitable for fitting child seats of this type. U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted. (2) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
  • Page 42 CHILD SEATS: attachment by seat belt (3/3) Visual installation for vehicles with seat adjustment ³ Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat. ² Seat not suitable for fitting child seats.
  • Page 43 CHILD SAFETY: deactivating, activating AIRBAG front passenger (1/3) Deactivating the front passenger airbag (on equipped vehicles) Before installing a child seat on the front passenger seat: – check that the child seat can be in- stalled on this seat; – it is essential to deactivate the airbagfor a rear-facing child seat.
  • Page 44 CHILD SAFETY: deactivating, activating AIRBAG front passenger (2/3) The markings on the dashboard and labels A on each side of the passen- ger sun visor 3 (example: label shown above) remind you of these instruc- tions. DANGER Since operation of the front passenger airbag is not compatible with the po- sition of a rear-facing child seat,...
  • Page 45 CHILD SAFETY: deactivating, activating AIRBAG front passenger (3/3) Operating faults It is forbidden to fit a rear-facing child seat to the front passenger seat if the airbag activation/deactivation system is faulty. Allowing any other passenger to sit in that seat is not recommended. Contact an approved dealer as soon as possible.

  • Page 46: Driving Position

    DRIVING POSITION: LEFT-HAND DRIVE (1/2) 1 2 3 9 10 1.40...

  • Page 47: Instrument Panel

    – windscreen and rear screen wash/wipe; 23 Cruise control/speed limiter con- 13 ALPINE card reader. Depending – trip computer and warning trols. on the vehicle, this is located system information readout. behind a cover (refer to “Starting, 24 Bonnet release control.
  • Page 48 DRIVING POSITION: RIGHT-HAND DRIVE (1/2) 8 11 1.42...
  • Page 49 22 Electric window control. – disabling the ESC functions and 12 Door mirror adjustment control. traction control; 23 ALPINE card reader. Depending on the vehicle, this is located 13 Multimedia equipment steering – hazard warning lights; behind a cover (refer to “Starting, column control.
  • Page 50 WARNING LIGHTS (1/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. In some cases, the appearance of a warning light is accompanied by a mes- sage. Side light warning light á Main beam headlight tell- tale Dipped beam headlight tell- tale...
  • Page 51 WARNING LIGHTS (2/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. À Brake circuit fault detection Oil pressure warning light warning light This lights up when the ignition This lights up when the ignition is is switched on and goes out after a few switched on and goes out after a few seconds.
  • Page 52 WARNING LIGHTS (3/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Ä Ô Toxic Fume Filter System Coolant temperature warn- Warning Light ing light The location of the warning light on On vehicles which are equipped with it, the instrument panel depends on the this light comes on when the engine is choice of driving mode selected and the...
  • Page 53 WARNING LIGHTS (4/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  Ð Gear change indicators Speed limiter warning light In manual mode, they il- Refer to the information on the luminate to advise you to change to a “Speed limiter”...
  • Page 54 WARNING LIGHTS (5/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. å ß Indicator lightAirbag Seat belt reminder warning light This lights up when the ignition is Please see the information on “Seat switched on and goes out after a few belts”...

  • Page 55: Trip Computer 2

    DISPLAYS AND INDICATORS (1/4) Depending on the driving mode se- lected, when warning light 3 (mode “Normal”) or warning light 6 (mode “Sport” or “Track”) is displayed in blue, this indicates that the coolant temper- ature is low. The engine performance is limited (power, torque and engine speed).
  • Page 56 DISPLAYS AND INDICATORS (2/4) Exterior temperature Speedometer 10 and 11 indicator 7 (km or miles per hour) The indicator 10 is provided as an in- dication. Clock 8 Control your speed according to the ap- proved speedometer only 11. Fuel gauge 9 Overspeed buzzer Depending on the vehicle, a beep sounds when the vehicle is travelling at...
  • Page 57 DISPLAYS AND INDICATORS (3/4) Indicators in mode “Sport” or – the engine speed 13. Indicates the engine rotation speed (in rpm); “Track” – the engine torque 14. Shows the Depending on the driving mode se- available torque level (in Newton lected (refer to “Choice of driving mode”...
  • Page 58 DISPLAYS AND INDICATORS (4/4) Instrument panel in miles To return to the previous mode, repeat (depending on vehicle, option to switch the same operation. to km/h) Note: once the battery is switched off, – With the vehicle stationary, press the trip computer and warning system several times on button 19 or 20 automatically returns to the original unit until the settings menu is displayed.
  • Page 59 ON-BOARD COMPUTER: general information (1/2) Trip computer A – Multifunction screen: press briefly f) estimated range; and successively (using button 3 g) distance before service; Scroll upwards or downwards through on handle 1), to scroll right through h) Reset the tyre pressure. the following information (buttons 4 or 5 the information about this function –...
  • Page 60 ON-BOARD COMPUTER: general information (2/2) Interpreting some of the values displayed after resetting The values showing average fuel con- sumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button. For the first few miles after pressing the reset key you will notice that the range increases as you travel.
  • Page 61 TRIP COMPUTER: trip settings (1/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected a) Distance travelled since the last reset. 522 km b) Average fuel consumption since the last reset. The value is displayed after having travelled at least 400 metres since the last 5.8 L/100 reset.
  • Page 62 TRIP COMPUTER: trip settings (2/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected d) Total mileage recorder. 101 778 km e) Current fuel consumption. This value is displayed after a speed of approximately 19 mph (30 km/h) is 7.4 L/100 reached.
  • Page 63 TRIP COMPUTER: journey parameters (3/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected On-board computer with distance before next service message (cntd.) g) Mileage before service or oil change. Mileage before service Service in SERVICE...
  • Page 64 TRIP COMPUTER: journey parameters (4/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected On-board computer with mileage- before-service message g) Mileage before service or oil change. Mileage before service Oil change in With the ignition switched on and the engine not running, SERVICE...
  • Page 65 TRIP COMPUTER: trip settings (5/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected h) Reset the tyre pressure. Tyre pressure SET [Press-hold] Please refer to the information on the “Tyre pressure loss warning” in Section 2. 1.59...
  • Page 66 TRIP COMPUTER AND WARNING SYSTEM: information messages These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages. Examples of messages Interpreting the display selected “Parking brake on”...
  • Page 67 TRIP COMPUTER AND WARNING SYSTEM: operating fault messages © These appear with the warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle. They disappear when the display selection key is pressed or after several seconds and are stored in the computer log.
  • Page 68 TRIP COMPUTER AND WARNING SYSTEM: warning message ® These appear with the warning light and require you to stop immediately, for your own safety, as soon as traf- fic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer. Some examples of warning messages are given below.

  • Page 69: Vehicle Settings Customisation Menu

    VEHICLE SETTINGS CUSTOMISATION MENU (1/2) Adjusting the settings On equipped vehicles, this function, – activating the guides for the revers- which is integrated in trip computer 1, ing camera; Use button 2 to browse and select the allows you to activate/deactivate and function to modify.
  • Page 70 VEHICLE SETTINGS CUSTOMISATION MENU (2/2) For options “Unit:” or “Language”, you will have to make a further selection. In function activated < this case, make your selection by navi- gating with button 3 or 4 and confirm by function deactivated holding button 2.

  • Page 71: Multifunction Screen

    MULTIFUNCTION SCREEN (1/2) Display – opening of the throttle valve; – pressure in the braking circuit; This system provides information on some technical parameters constantly – turbocharging pressure in real time; and in real time. – measurement of transverse and lon- After the vehicle ignition is switched on, gitudinal accelerations.
  • Page 72 MULTIFUNCTION SCREEN (2/2) Display Opening of the throttle valve 6 Measurement of transverse and Provides information on the position of longitudinal accelerations 9 This system provides information on the throttle valve flap (in percent). When you accelerate, slow down or some technical parameters constantly turn, the vehicle undergoes transverse and in real time via the multimedia...
  • Page 73 CLOCK AND EXTERIOR TEMPERATURE (1/2) Clock Then press briefly the 5 button on the 2 To exit the clock menu, briefly press handle until the clock is displayed. again on button 3. Vehicles not fitted with a multimedia – Briefly press the 3 button on the 1 display, navigation aid system, handle to access the hour setting;...
  • Page 74 CLOCK AND EXTERIOR TEMPERATURE (2/2) External temperature indicator Special note: When the exterior temperature is be- tween – 3 °C and +3 °C, the °C char- acters flash (signalling a risk of ice on the road). Vehicles fitted with a multimedia display, navigation aid system, telephone, etc.

  • Page 75: Rear View Mirrors

    REAR VIEW MIRRORS (1/2) Folding rear view mirrors Press the switch 1 to fold in the door mirrors. Press the switch 1 again to au- tomatically fold out the door mirrors. Welcome and goodbye function (depending on the vehicle) When the door mirrors are not folded in by pressing switch 1, they: –...
  • Page 76 REAR VIEW MIRRORS (2/2) Rear view mirror without lever 4 The rear-view mirror darkens automati- cally at night if you are being followed by a vehicle with its lights on. Interior rear view mirror Its position can be adjusted. Rear view mirror with lever 4 When driving at night, to avoid being dazzled by the headlights of the vehicle behind, depress the little lever located...

  • Page 77: Exterior Lighting And Signals

    EXTERIOR LIGHTING AND SIGNALS (1/3) Side lights Daytime running lights function Turn the 2 ring on the 1 stalk until the symbol is opposite mark 3. Turn the ring 2 on the stalk 1 until the This indicator light on the instrument symbol AUTO is opposite mark 3.
  • Page 78 EXTERIOR LIGHTING AND SIGNALS (2/3) á Main beam headlights Lights-on reminder buzzer With the engine running and A warning beep sounds when the driv- the dipped beam headlights lit, push er’s door is opened to warn you that the stalk 1. This indicator light on the instru- lights are still on.
  • Page 79 EXTERIOR LIGHTING AND SIGNALS (3/3) Switching off the lights Turn the ring 4 again until the mark 3 is opposite the rear fog lights symbol. The warning light on the instrument panel goes out. The rear fog lights switch off when the exterior lights are switched off.

  • Page 80: Audible And Visual Signals

    AUDIBLE AND VISUAL SIGNALS Direction indicators Move stalk 1 parallel to the steering wheel and in the direction you are going to turn it. One-touch mode When driving, it is possible that the steering wheel may not be turned suf- ficiently to return the stalk automatically to its starting position.
  • Page 81 SCREEN WASHER, WIPER (1/2) Vehicles with automatic wiper function With the engine running, press the stalk 1. A switching off B automatic wiper function When this position is selected, the system detects water on the wind- screen and triggers the wipers at a suitable wiping speed.

  • Page 82: Windscreen Washer, Wiper

    SCREEN WASHER, WIPER (2/2) Efficiency of a wiper blade Check the condition of the wiper blades. How long they last depends on you: – it must remain clean: clean the blade and the screen regularly with soapy water; – do not use it when the screen is dry;...

  • Page 83: Fuel Tank (Filling With Fuel)

    FUEL TANK (1/3) After filling, check that the cover is closed. Never press valve 2 with your fingers. Do not wash the filler area with a high-pressure washer. Fuel grade Capacity of the fuel tank: 45 litres ap- Do not mix even small proximately.
  • Page 84 FUEL TANK (2/3) Filling with fuel It is essential to use unleaded petrol. The octane rating (RON) must comply With the ignition off, insert the nozzle to with the information given on the label open valve 2 and insert it fully before on the cover 1.
  • Page 85 FUEL TANK (3/3) Persistent fuel odour If you notice a persistent fuel odour you should: – stop the vehicle as soon as traf- fic conditions allow and switch off No modifications what- the ignition; soever are permitted on – switch on the hazard warning any part of the fuel supply lights and ask your passengers to system (electronic units,...
  • Page 86 1.80...
  • Page 87 Section 2: Driving (Advice on use relating to fuel economy and the environment) Running in ..............Starting, stopping the engine .

  • Page 88: Running In

    RUNNING IN Running-in the engine Running-in the brake pads Up to 620 miles (1,000 km), do not If the vehicle is equipped with new exceed 80 mph (130 km/h) in top gear pads, the brakes require running-in. or 3,500 rpm in the other gears and do Therefore, it is recommended that you not accelerate by fully depressing the do not press the brake pedal too hard...

  • Page 89: Starting, Stopping The Engine

    STARTING, STOPPING THE ENGINE (1/4) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone in your vehicle, even for a short time. They may pose a risk to themselves Starting with “hands-free”...
  • Page 90 STARTING, STOPPING THE ENGINE (2/4) Special features – If one of the starting conditions is not applied, the message “Press brake + START” or “Select P” is displayed on the instrument panel; – in some cases, it will be necessary to move the steering wheel whilst pressing the start button 1 to help unlock the steering column;...
  • Page 91 STARTING, STOPPING THE ENGINE (3/4) Conditions for stopping the engine The vehicle must be stationary, gearbox in position P or N (refer to “Automatic gearbox” in Section 2). Operating faults The message “Please insert keycard” appears on the instrument panel. In certain cases, the hands-free card Pull cover 5 by the flaps 6 to unclip it.
  • Page 92 STARTING, STOPPING THE ENGINE (4/4) “Hands-free” card Remote control card With the card in the vehicle, press With the card in the reader 3, press button 1: the engine stops. The steer- button 1: the engine stops. Removing ing column is locked when the driver’s the card from the reader locks the door is opened or the vehicle is locked.

  • Page 93: Choice Of Driving Mode

    CHOICE OF DRIVING MODE (1/2) Driving mode activation Normal mode control This is the default operating mode for the engine, the gearbox and the ESC Depending on the vehicle, you have system and the traction control when- three modes: ever the ignition is switched on. –...
  • Page 94 CHOICE OF DRIVING MODE (2/2) With the gearbox in position D or Hazard warning lights switching on M (refer to “Automatic Gearbox” in Depending on the vehicle, these may Section 2), press and hold the 1 switch light up in the event of sudden decel- to select Track mode.

  • Page 95: Standing Start Procedure

    STANDING START PROCEDURE (1/2) Activating the system The system is activated by: – with the engine running, and the vehicle stationary; – mode Sport or Track activated (refer to “Choice of driving mode” in Section 2); – depress the brake pedal with the left foot;...
  • Page 96 STANDING START PROCEDURE (2/2) Conditions for non-activation of the system Certain conditions will not enable the system to be activated: – five successive authorised standing start procedures - beyond five pro- cedures being performed, the func- tion will be prevented for approxima- tely 10 minutes;...

  • Page 97: Stop And Start Function

    STOP AND START FUNCTION (1/4) This system enables a reduced fuel The standby engine is maintained if po- consumption and lower greenhouse sition P (refer to “Automatic gearbox” in gas emissions. Section 2) is engaged, or if position N is engaged and the parking brake is ap- The system is activated automati- plied while the brake pedal is released.
  • Page 98 STOP AND START FUNCTION (2/4) Preventing the engine from Conditions for coming out of Special note: depending on the vehi- cle, if you switch off the ignition when standing by engine standby the engine is on standby, the warning Ä In certain situations, such as negotiat- The brake pedal is released, position D light...
  • Page 99 STOP AND START FUNCTION (3/4) Conditions preventing the Special cases – the gradient is too steep; standby of the engine – the “Clear View” function is activated With the engine on standby (traffic jam, (please see “Automatic climate con- traffic lights, etc.), if the driver unfastens Certain conditions prevent the system trol”...
  • Page 100 STOP AND START FUNCTION (4/4) Special feature of the automatic The system reactivates automati- engine re-start cally each time the vehicle is started using the start button (please refer Under certain conditions, the engine to “Starting, stopping the engine” in can restart on its own in order to guar- Section 2).

  • Page 101: Special Features Of Petrol Versions

    SPECIAL FEATURES OF PETROL VERSIONS (1/2) The following operating conditions: If you notice any of the above operating faults, have the necessary repairs car- – driving for long periods when the low ried out as soon as possible by an ap- fuel level warning light is lit;...
  • Page 102 SPECIAL FEATURES OF PETROL VERSIONS (2/2) Particle filter Note: The indicator light may go out If the filter becomes saturated, the © after 20 minutes when the driving con- warning light and, depending The particle filter is used in the treat- ...

  • Page 103: Electronic Parking Brake

    ELECTRONIC PARKING BRAKE (1/4) To confirm that the electronic parking brake is applied, the message “Parking brake on” and the warning light on the instrument panel and warning light 3 on the switch 2 light up. After the engine is switched off, warn- ing light 3 goes out several minutes after the electronic parking brake has been applied and warning light...
  • Page 104 ELECTRONIC PARKING BRAKE (2/4) Special feature related to the Stop and Start function: if the driver's seat is unfas- tened before the engine goes into standby due to the Stop and Start function, make sure that the parking brake is applied: the indicator light on the instru- ment panel confirms this.
  • Page 105 ELECTRONIC PARKING BRAKE (3/4) Special cases To park the vehicle without applying the electronic parking brake (if there is a If the message “Electric fail- risk of freezing, for example): ure DANGER” or another – stop the engine by pressing the message asks you to apply engine Start/Stop button 1;...
  • Page 106 ELECTRONIC PARKING BRAKE (4/4) Operating faults For safety reasons, automatic release is deactivated when the driver’s door is © – If there is a fault, the warning open or not shut properly, the driver’s light illuminates on the instrument seatbelt is not fastened and the engine panel accompanied by the “Check is running (in order to prevent the vehi- parking brake”...

  • Page 107: Driving Advice, Eco-Driving

    DRIVING ADVICE, ECO DRIVING (1/3) Fuel consumption is accredited in ac- cordance with a standard regulatory method. Identical for all manufactu- rers, this enables vehicles to be com- pared with one another. Consumption in real time depends on vehicle usage conditions, the equipment fitted and the user’s driving style.
  • Page 108 DRIVING ADVICE, ECO DRIVING (2/3) – Do not overrev the engine in the in- termediate gears. You should always use the highest gear possible. – Avoid sudden acceleration. – Brake as little as possible. If you an- ticipate an obstacle or bend in ad- vance, you may then simply release the accelerator pedal.
  • Page 109 DRIVING ADVICE, ECO DRIVING (3/3) – In vehicles fitted with air condi- tioning, it is normal to observe an increase in fuel consumption (espe- cially in urban conditions) when it is used. For vehicles fitted with manual air conditioning, switch off the system when it is not required.

  • Page 110: Maintenance And Antipollution Advice

    MAINTENANCE AND ANTIPOLLUTION ADVICE Your vehicle complies with criteria for In addition, replacing engine, fuel – Air filter, fuel filter: a choked ele- recycling and recovering vehicles at the supply system and exhaust compo- ment will reduce efficiency. It must end of their service life, which entered nents with parts other than those origi- be replaced.

  • Page 111: Environment

    ENVIRONMENT Emissions Your vehicle has been designed with – At the end of the vehicle’s service respect for the environment in mind for life, it should be sent to approved For the usage phase, your vehicle was its entire service life: during production, centres to ensure that it is recycled.

  • Page 112: Tyre Pressure Loss Warning

    TYRE PRESSURE LOSS WARNING (1/3) Operating principle Resetting the standard level for the tyre pressures Each wheel (except for the emergency spare wheel if fitted) has a sensor in the This should be done: inflation valve which periodically meas- – when the standard tyre pressure ures the tyre pressure during driving.
  • Page 113 TYRE PRESSURE LOSS WARNING (2/3) Reinitialisation is carried out after a few “Puncture” minutes’ driving.  The warning light comes on Note: the value of the tyre pressure can steady, accompanied by the message not be less than that recommended and “Puncture”...
  • Page 114 TYRE PRESSURE LOSS WARNING (3/3) Replacing wheels/tyres Tyre repair product and “Check tyre pressure sensors”  inflation kit This system requires specific equip- The warning light flashes for ment (wheels, tyres, etc.). Please see Because the valves are specially desi- several seconds, then stays on, along the information on “Tyres”...
  • Page 115 DRIVING CORRECTION DEVICES AND AIDS (1/5) ABS (anti-lock braking – ABS (anti-lock braking system); Operating faults: – ESC (electronic stability control) system) © with understeer control and trac- – lit up on the in- Under heavy braking, the ABS prevents tion control;...
  • Page 116 DRIVING CORRECTION DEVICES AND AIDS (2/5) Electronic stability control Understeer control Operating faults ESC with understeer control This system optimises the action of the When the system detects an operat- and traction control ESC in the case of pronounced under- ing fault the message “Check ESC”...
  • Page 117 DRIVING CORRECTION DEVICES AND AIDS (3/5) ESC and traction control in mode You can reactivate at any time these Track functions by briefly pressing the 2 switch. After pressing and holding the 1 switch to select Track mode, the ESC func- tions can be modified and delay the driving assistance (refer to “Choice of driving mode”...
  • Page 118 DRIVING CORRECTION DEVICES AND AIDS (4/5) Emergency brake assist Hazard warning lights switching on Depending on the vehicle, these may This system supplements the ABS light up in the event of sudden decel- and helps reduce vehicle stopping dis- eration. tances.
  • Page 119 DRIVING CORRECTION DEVICES AND AIDS (5/5) Hill start assistance The hill start assistance Depending on the gradient of the in- system cannot completely cline, this system assists the driver prevent the vehicle from when starting on a hill. It prevents the rolling backwards in all sit- vehicle from rolling backwards by au- uations (extremely steep gradients...

  • Page 120: Speed Limiter

    SPEED LIMITER (1/3) Switching on   Press switch 1 on side . The dicator light appears in orange on the instrument panel, accompanied by dashes to indicate that the speed lim- iter function is activated and waiting to store a limited speed. To store the current speed, press switch 2 on side a (+): the limited speed replaces the dashes.
  • Page 121 SPEED LIMITER (2/3) Varying the limit speed Exceeding the limit speed The speed limiter can be changed by It is possible to exceed the limit speed repeatedly pressing the switch 2: at any time. To do this: press the accel- erator pedal firmly and fully (beyond –...
  • Page 122 SPEED LIMITER (3/3) Recalling the limit speed If a speed has been saved, it can be recalled by pressing switch 3 (RES). Putting the function on Switching off the function standby The speed limiter function is deac- tivated if you press switch 1: in this The speed limiter function is suspended case a speed is no longer stored.

  • Page 123: Cruise Control

    CRUISE CONTROL (1/4) This function is an addi- tional driving aid. The func- tion does not take the place Controls The cruise control function helps you to of the driver. Therefore, it maintain your driving speed at a speed 1 Main “On/Off” switch. can under no circumstances replace that you choose, called the cruising the driver’s responsibility to respect...
  • Page 124 CRUISE CONTROL (2/4) Activating cruise control At a steady speed (above approximately 19 mph (30 km/h)) press switch 2 on the a (+) side: the function is activated and the current speed is memorised. The cruising speed replaces the dashes and cruise control is confirmed by the appearance of the cruising speed in ...
  • Page 125 CRUISE CONTROL (3/4) Exceeding the cruising speed The cruising speed may be exceeded at any time by depressing the accelera- tor pedal. While overtaking, the cruis- ing speed flashes red on the instrument panel. Then, release the accelerator: after a few seconds, the vehicle will automati- cally return to its set cruising speed.
  • Page 126 CRUISE CONTROL (4/4) Returning to the cruising speed If a speed is stored, it can be recalled, once you are sure that the road con- ditions are suitable (traffic, road sur- face, weather conditions, etc.). Press switch 3 (RES) if the vehicle speed is above 20 mph (30 km/h).

  • Page 127: Parking Distance Control

    PARKING DISTANCE CONTROL (1/2) Operating principle Ultrasonic detectors, installed in the rear bumper and, depending on the ve- This function is an addi- hicle, the front bumper, measure the tional aid that indicates the distance between the vehicle and an distance between the vehi- obstacle.
  • Page 128 PARKING DISTANCE CONTROL (2/2) Operating faults Depending on the vehicle, when the system detects an operating fault the message “Check parking sensor” ap- pears on the instrument panel along © with the warning light. Consult an approved dealer Deactivating the system You can disable the parking distance control from the setting menu (refer to “Vehicle settings customisation menu”...

  • Page 129: Reversing Camera

    REVERSING CAMERA (1/2) Special feature Make sure that the camera is not ob- scured (by dirt, mud, snow, condensa- tion etc.). Operation This function is an additional When moving into reverse gear, the aid. It cannot, therefore, camera 1 displays the surroundings of under any circumstances the rear of the vehicle to the instrument replace the vigilance or the...
  • Page 130 REVERSING CAMERA (2/2) The screen shows a reverse image. 3 moving guide line: This gauge remains fixed and indicates The frames are a representation (depending on vehicle) the vehicle trajectory if the wheels are projected onto flat ground; this in- in line with the vehicle.
  • Page 131 AUTOMATIC TRANSMISSION (1/7) Selection controls Gear changing paddles 1 Operation and 2 Switches R, N and D can be used to With the vehicle stopped, ignition select the various gearbox positions: switched on and assisted parking brake Paddles 1 and 2 can be used to change –...
  • Page 132 AUTOMATIC TRANSMISSION (2/7) To disengage the “Parking” position (P) With the vehicle at a standstill, engine running, depress the brake pedal and select the desired position (R), (N), (M) When you select position (D), (M) or or (D). (R), the vehicle moves forward as Gearbox positions (R), (N), (D) or (M) soon as you release the brake pedal should only be engaged when the...
  • Page 133 AUTOMATIC TRANSMISSION (3/7) To engage neutral (N) Driving in automatic mode: Note: with the engine running and the vehicle travelling between 0 and position (D) With the vehicle stationary, engine run- 6.2 mph (0 and 10 km/h), in position (N) ning, press the brake pedal and briefly With the vehicle stationary, engine run- or (R), it is not necessary to depress...

  • Page 134: Automatic Gearbox

    AUTOMATIC TRANSMISSION (4/7) Driving in manual mode: Driving in temporary manual mode Special cases position (M) The temporary manual mode can be In certain driving modes (e.g., engine used when the automatic mode (D) has protection, operation of the electronic With the vehicle stationary, engine run- previously been engaged.
  • Page 135 AUTOMATIC TRANSMISSION (5/7) Gear changing threshold indicator Special cases When the 6 indicator is displayed on In certain driving modes (e.g. protect- the instrument panel: ing the engine), a gear change may be – in white with dashes, the gear en- performed automatically if there is a gaged complies with the engine risk of over-revving or approaching un-...
  • Page 136 AUTOMATIC TRANSMISSION (6/7) Parking the vehicle With the engine off, ignition on, doors closed and gearbox in position (P), it is When the engine is switched off by possible to switch to position (N) by a pressing the button, position (P) is au- short press on the N switch while simul- tomatically engaged as well as the taneously depressing the brake pedal...
  • Page 137 AUTOMATIC TRANSMISSION (7/7) To select reverse gear Special circumstances Operating faults With the vehicle stationary, engine run- If the bends and road surface do not – when driving, if the message ning and in position (P), (N), (M) or (D), allow you to stay in automatic mode “Check auto gearbox”...
  • Page 138 2.52...
  • Page 139 Section 3: Your comfort Air vents............... Automatic climate control .
  • Page 140 AIR VENTS, air outlets (1/2) 1 side window demister outlet 2 side air vents 3 windscreen demisting vents 4 centre air vent 5 passenger footwell heater outlets 6 control panel...

  • Page 141: Air Vents

    AIR VENTS, air outlets (2/2) To remove bad odours from your ve- hicles, only use the systems designed for this purpose. Consult an approved Dealer. Centre air vent Side air vents The centre air vent 4 is not adjustable. Air flow To open the air vent 2, press on the air vent (point 7) until it is open as far as required.

  • Page 142: Automatic Climate Control

    AUTOMATIC CLIMATE CONTROL (1/4) Varying the ventilation speed In automatic mode, the system uses the most suitable amount of air to reach and maintain the desired comfort level. You can still adjust the ventilation speed by turning control 6 to increase or reduce the ventilation speed.
  • Page 143 AUTOMATIC CLIMATE CONTROL (2/4) Clear View function Press button 3; the indicator lights on buttons 3 and 8 appear. This function quickly de-ices and de- mists the windscreen, the front side windows, the exterior rear view mirrors and (depending on the vehicle) the rear screen.
  • Page 144 AUTOMATIC CLIMATE CONTROL (3/4) De-icing function Switching air conditioning on or off Press the 8 button: the integrated in- dicator light comes on. This function In automatic mode, the system switches quickly de-ices the rear view mirrors the air conditioning system on or off, and (depending on the vehicle) the rear depending on the climate conditions.
  • Page 145 AUTOMATIC CLIMATE CONTROL (4/4) Stopping the system Turn the control 6 to “OFF” to stop the system. To start it, turn the control 6 again, then adjust the fan speed or press the button 1. Air recirculation (isolation of Manual use the passenger compartment) Press button 7 –...
  • Page 146 AIR CONDITIONING: information and operating instructions (1/2) Advice on use Fuel consumption Operating faults In some situations (air conditioning off, You will normally notice an increase in As a general rule, contact your ap- air recirculation activated, ventilation fuel consumption (especially in town) proved dealer in the event of an oper- speed at zero or low etc.), you may when the air conditioning is operating.
  • Page 147 AIR CONDITIONING: information and operating instructions (2/2) Ñ Type of refrigerant fluid  Type of oil in the air condi- tioning circuit  Inflammable product  Consult the driver’s hand- book  Maintenance Quantity of refrigerant fluid present in the ve- x.xxx kg The refrigerant fluid circuit (of which hicle.

  • Page 148: Multimedia Equipment

    MULTIMEDIA EQUIPMENT The presence and location of this equip- ment depends on the vehicle version. 1 Multimedia screen; 2 Multimedia sockets; 3 Steering column control; 4 Voice commands; 5 Microphone. Multimedia sockets 2 The sockets USB can also be used to recharge accessories with a maximum You can use the USB sockets to access power rating of 12 Watts (5 Volts) per...

  • Page 149: Electric Windows

    ELECTRIC WINDOWS (1/2) These systems operate: – with the engine running; – depending on the vehicle, with the engine not running and the remote control card in the reader; – after the ignition is switched off until one of the doors is opened (limited to approximately three minutes);...
  • Page 150 ELECTRIC WINDOWS (2/2) Operating faults Impossible to operate the one-touch electric window In case of a fault when closing a window, The one-touch electric window is the system reverts to normal mode: equipped with heat protection: if you pull the switch concerned up as often press the switch for the window more as necessary to fully close the window than sixteen consecutive times it goes...

  • Page 151: Interior Lighting

    INTERIOR LIGHTING Courtesy light Bonnet storage compartment Luggage compartment light 4 light 3 The 1 or 2 lights switch on when one of Light 4 comes on when the luggage the doors are opened. The lights only compartment is opened. The light 3 switches on when the bonnet switch off when the doors concerned is opened.

  • Page 152: Passenger Compartment Storage, Fittings

    PASSENGER COMPARTMENT STORAGE, FITTINGS (1/2) Storage compartment 1 Cup holders 3 Storage compartment 4 (depending on the vehicle) This can be used for storing a mobile Mobile phone storage ashtray, cup holder, etc. To open, lift the lid 5 to access the stor- age 4.
  • Page 153 PASSENGER COMPARTMENT STORAGE, FITTINGS (2/2) Storage net 6 Front sun visor (depending on the vehicle) Lower sun visor 7. Courtesy mirror 8 (depending on the vehicle) The passenger sun blind is fitted with a Nothing should be placed courtesy mirror. on the floor area in front of Do not place any heavy or the driver as such objects...

  • Page 154: Accessories Socket

    ACCESSORIES SOCKET Accessories socket 1 You can use the 1 socket. It is provided for connecting accessories approved by our Technical Department. Connect accessories with a maximum power of 120 watts (12 V) only. When several accessory sockets are used at the same time, the total power of the connected accessories must not exceed 180 watts.

  • Page 155: Storage Compartment Under The Bonnet

    STORAGE COMPARTMENT UNDER THE BONNET Vehicles not fitted with storage compartment A Vehicles not fitted with storage compartment A Due to the presence of me- chanical components: – it is forbidden to store objects Storage compartment A under the bonnet; under the bonnet –...

  • Page 156: Luggage Compartment

    LUGGAGE COMPARTMENT/TRANSPORTING OBJECTS IN THE LUGGAGE COMPARTMENT Because it is near to the engine compartment, the temperature on the luggage compartment may reach 50°C after the engine is switched off. – Make sure you do not touch the hot sections near the engine compartment.
  • Page 157 Section 4: Maintenance Rear engine compartment ............Engine oil level: general information .

  • Page 158: Rear Engine Compartment

    REAR ENGINE COMPARTMENT (1/2) Access to the engine compartment Before performing any action in the engine com- – Open the luggage compartment Please note when working partment, the ignition must (refer to “Luggage compartment” in close to the engine that it be switched off (please see Section 3);...
  • Page 159 REAR ENGINE COMPARTMENT (2/2) Closing/locking of the engine To facilitate complete closing of the rear screen, it is recommended that you access flap keep the luggage compartment open. – Check that nothing has been left in After any procedure in the Most importantly, do not let go of the the engine compartment;...

  • Page 160: Engine Oil Level: General Information

    ENGINE OIL LEVEL: general information (1/2) Reading the oil level Minimum oil level warning on It is normal for an engine to use oil for lubrication and cooling of moving parts the instrument panel The oil level should be read with the ve- and it is normal to top up the level be- hicle on level ground, after the engine The instrument panel display only...
  • Page 161 ENGINE OIL LEVEL: general information (2/2) Minimum oil level check on Reading the level using the the instrument panel dipstick With the vehicle positioned on level – Remove the dipstick at the rear of ground with the ignition off for approx- the engine compartment and wipe it imately five minutes, press the engine with a clean, lint-free cloth;...
  • Page 162 ENGINE OIL LEVEL: topping up, filling, draining (1/2) – Unscrew cap 1; – top up the oil (please note that the capacity between the “MINI” and the “MAXI” marks on the dipstick 2 is ap- proximately 0.22 gal (1 litre); –...
  • Page 163 ENGINE OIL LEVEL: topping up, filling, draining (2/2) Oil change Engine oil grade Refer to the Maintenance Service Service interval: refer Consult your approved dealer at Booklet for your vehicle. Maintenance Service Booklet for your once if you notice an abnormal or vehicle.

  • Page 164: Coolant Level

    COOLANT LEVEL Frequency of checking coolant level Replacement interval Check the coolant level regularly Refer to the Maintenance Document for (very severe damage is likely to be your vehicle. caused to the engine if it runs out of coolant). If the level needs to be topped up, only use products approved by our Technical Department which ensure: –...

  • Page 165: Bonnet

    BONNET Vehicles not fitted with storage compartment A Due to the presence of me- chanical components: – it is forbidden to store objects under the bonnet; – when working on the engine compartment, ensure that you do not leave anything (cloths, tools, etc.) Otherwise, this may lead to the mechanical components being damaged or cause a fire.

  • Page 166: Levels

    LEVELS (1/4) – move to the left (movement C) to re- lease the right-hand side of the run channel and facilitate its movement in relation to the strut; – place the run channel 1 gently on a clean and dry surface. Vehicles not fitted with storage compartment A Due to the presence of me-...
  • Page 167 LEVELS (2/4) Refitting the scuttle panel grille run Note: if you have difficulty clipping the channel run channel 1 (movement G), check if it has been inserted into components 5 It is important to reposition the run and 7: risk of damage to run channel. channel 1 correctly.
  • Page 168 LEVELS (3/4) Topping up After any operation on the hydraulic cir- cuit, a specialist must replace the brake fluid. Only use fluids approved by our Technical Department (and taken from a sealed container). Replacement interval Refer to the Maintenance Document for your vehicle.

  • Page 169: Windscreen Washer Reservoir

    LEVELS /FILTERS (4/4) Liquid Windscreen washer fluid. In winter, use anti-freeze product. Use products rec- ommended by an authorised dealer. Filters The filter elements (air filter, passenger compartment filter, etc.) should be re- placed during the maintenance opera- tions carried out on your vehicle. Replacement intervals for filter el- ements: refer to the Maintenance Document for your vehicle.

  • Page 170: Battery

    BATTERY For your own safety and for the proper operation of the vehicle's electrical equip- ment (lights, windscreen wipers, ABS, etc.), any intervention on the battery (removal, disconnec- tion, etc.) must categorically be per- formed by a specialist professional. Battery 1 does not require any mainte- Label A Risk of serious burns or electric nance.

  • Page 171: Tyre Pressure

    TYRE PRESSURE (1/2) Label A Vehicle fitted with a tyre pressure B: size of the tyres fitted to the vehicle. loss warning system C: driving speed intended on roads Open the driver’s door to read it. If under-inflated (puncture, low pressure and motorways.
  • Page 172 TYRE PRESSURE (2/2) Tyre safety and use of snow chains: Refer to the information on “Tyres” in Section 5 for the servicing conditions and, depending on the version, the use of chains. For your safety, please re- spect the speed limit. When they need to be re- placed, only tyres of the same make, size, type and profile...

  • Page 173: Bodywork Maintenance

    BODYWORK MAINTENANCE (1/3) You should A well-maintained vehicle will last Respect local regulations about wash- longer. It is therefore recommended to ing vehicles (e.g. do not wash your ve- Wash your car frequently, with the maintain the exterior of the vehicle reg- hicle on a public highway).
  • Page 174 BODYWORK MAINTENANCE (2/3) What you should not do Wash the vehicle in bright sunlight or Degrease or clean the freezing temperatures. vehicle using high-pres- sure cleaning equipment Do not scrape off mud or dirt without or by spraying on prod- pre-wetting.
  • Page 175 BODYWORK MAINTENANCE (3/3) Vehicles with a matte paint Using a roller type car wash Cleaning the headlights, finish sensors and cameras Return the windscreen wiper stalk to the Park position (refer to the informa- This type of paint requires certain pre- Use a soft cloth or cotton wool.

  • Page 176: Interior Trim Maintenance

    INTERIOR TRIM MAINTENANCE (1/2) Glass instrument panel Textiles (seats, door trim, etc) A well-maintained vehicle will last longer. It is therefore recommended to (e.g. instrument panel, clock, exterior Vacuum-clean the textiles regularly. maintain the interior of the vehicle regu- temperature display etc.) larly.
  • Page 177 INTERIOR TRIM MAINTENANCE (2/2) Removal/replacing removable You should not: equipment originally fitted in Position objects such as deodorants, the vehicle scents etc. near air vents as this could damage your dashboard trim. If you need to remove equipment in order to clean the passenger com- partment (for example, mats), always ensure that they are correctly refitted and are the right way around (the driv-...
  • Page 178 4.22...
  • Page 179 Section 5: Practical advice Puncture, emergency spare wheel ..........Tyre inflation kit .

  • Page 180: Puncture, Emergency Spare Wheel

    PUNCTURE, EMERGENCY SPARE WHEEL In case of puncture Emergency spare wheel Depending on the vehicle, a tyre infla- If the vehicle is equipped with one, the tion kit or emergency spare wheel is emergency wheel 1 is located in a stor- provided (refer to the following pages).
  • Page 181 TYRE INFLATION KIT (1/4) Do not attempt to use the The kit is only approved for inflation kit if the tyre has inflating the tyres of the ve- been damaged as a result hicle originally equipped of driving with a puncture. with the kit.
  • Page 182 TYRE INFLATION KIT (2/4) In the event of a puncture, use the kit Note: while the bottle is emptying located in the luggage compartment. (approximately 30 seconds), the pressure gauge 1 will briefly indicate Vehicle fitted with a tyre pressure a pressure of up to 6 bar, then the loss warning system pressure drops.
  • Page 183 TYRE INFLATION KIT (3/4) Once the tyre is correctly inflated, – Start immediately and drive at a remove the kit: unscrew the inflation speed of 12.4 to 37.2 mph (20 to adapter slowly from the container 3 to 60 km/h) in order to distribute the prevent any product spatter and store product evenly in the tyre;...

  • Page 184: Tyre Inflation Kit

    TYRE INFLATION KIT (4/4) Precautions when using the The kit should not be operated for more than 15 consecutive minutes. The container must be replaced after the first use even if liquid remains inside. Following repair with the kit, do not travel further than 124 miles (200 km).

  • Page 185: Tools

    TOOLS The presence of the tools depends on The inflation kit case located in the the vehicle. luggage compartment contains: The emergency spare wheel storage Tweezers 3 case located on the passenger seat Do not leave the tools unse- This is used to remove the wheel bolt cured inside the vehicle as contains a bag with: covers.

  • Page 186: Changing A Wheel

    CHANGING A WHEEL (1/2) Vehicles equipped with a jack Continue to crank the jack so that the baseplate is correctly positioned (it and wheelbrace should be underneath the vehicle and For vehicles equipped with such, aligned with the jack head). remove the wheel bolt covers using the Turn the wheelbrace until the wheel lifts pliers stored in the inflation kit casing.
  • Page 187 CHANGING A WHEEL (2/2) Undo the bolts and take off the wheel. Vehicle fitted with a tyre pressure loss warning system Fit the emergency spare wheel on the central hub and turn it to locate the If under-inflated (puncture, low pres- ...

  • Page 188: Tyres (Tyre And Wheel Safety, Use In Winter)

    TYRES (1/4) Tyre and wheel safety When the tyre tread has been worn to the level of the wear indicators, they The tyres are the only contact between become visible 2: it is then necessary the vehicle and the road, so it is essen- to replace your tyres because the tread tial to keep them in good condition.
  • Page 189 TYRES (2/4) Tyre pressures Pressures should be checked when the Vehicle fitted with a tyre pressure tyres are cold; ignore higher pressures loss warning system Adhere to the tyre pressures (including which may be reached in hot weather the emergency spare wheel). The tyre If under-inflated (puncture, low pressure or following a fast journey.
  • Page 190 TYRES (3/4) Fitting new tyres For your safety reasons. For your safety, please re- spect the speed limit. Only tyres identical to those fitted originally or recom- When they need to be re- mended by an approved placed, only tyres of the dealer must be used.
  • Page 191 TYRES (4/4) Use in winter Snow or Winter tyres We would recommend that these be Chains fitted to all four wheels to ensure that For safety reasons, the fitting of your vehicle retains maximum adhe- snow chains to the rear axle is a sion.
  • Page 192 FRONT HEADLIGHTS: replacing the bulbs LED Main beam headlights 2 Please consult an authorised dealer. LED dipped beam headlights 3 Please consult an authorised dealer. LED direction indicators 4 Please consult an authorised dealer. LED daytime running lights and side lights 1 Please consult an authorised dealer.
  • Page 193 REAR LIGHTS AND SIDE LIGHTS: replacing the bulbs Side lights/brake and Number plate lights 4 Indicator lights 5 direction indicator lights 1 Please consult an authorised dealer. As it is necessary to replace the entire indicator light (bulb mounted on the Please consult an authorised dealer.
  • Page 194 INTERIOR LIGHTING: changing bulbs (1/2) Courtesy light 1 Bonnet storage compartment light 2 Consult an approved dealer. – Unclip light 2 by pressing tab 3; – remove the light cover to gain access to the bulb. Bulb type: W5W. 5.16...
  • Page 195 INTERIOR LIGHTING: changing bulbs (2/2) Luggage compartment light 4 Unclip the light 4 by pressing the tab on its left side (using a flat-bladed screw- driver or similar). Remove the bulb concerned. Bulb type: W5W. The bulbs are under pres- sure and can break when replaced.

  • Page 196: Card: Battery

    CARD: battery (1/2) The batteries are available from ap- proved Dealers, and their service life approximately two years. Check that there is no dye on the battery: risk of an incorrect electrical con- tact. Replacing the battery When refitting, proceed in the reverse If they need to be replaced, order, then press one of the buttons on When the message “Keycard battery...
  • Page 197 CARD: battery (2/2) Operating faults Precautions relating If the battery is too low to operate, you to batteries: can still start the vehicle (insert the card – keep (new or used) batter- in the card reader) and lock/unlock the ies out of reach of children; vehicle (please see “Locking/unlocking the doors”...

  • Page 198: Battery: Troubleshooting

    BATTERY: troubleshooting (1/4) To avoid all risk of sparks: Connecting a battery charger – Ensure that any electrical consumers The battery charger must be com- (courtesy lights, etc.) are switched patible with a battery with nominal off before disconnecting or recon- voltage of 12 volts.
  • Page 199 BATTERY: troubleshooting (2/4) Starting the vehicle using the – move to the left (movement C) to re- lease the right-hand side of the run battery from another vehicle channel and facilitate its movement If you have to use the battery from an- in relation to the strut;...
  • Page 200 BATTERY: troubleshooting (3/4) Refitting the scuttle panel grille run Note: if you have difficulty clipping the channel run channel 3 (movement G), check if it has been inserted into components 4 It is important to reposition the run and 6: risk of damage to run channel. channel 3 correctly.
  • Page 201 BATTERY: troubleshooting (4/4) Start the engine of the vehicle supply- Start the engine, and as soon as it starts ing the current and run it at intermedi- running, disconnect cables A and B in ate engine speed. reverse order (7 - 10 - 9 - 8). Depending on the vehicle, unclip the battery cover.

  • Page 202: Fuses

    FUSES (1/4) Fuses in passenger compartment A Tweezers B If any electrical component does not The pliers B are stored with the tyre in- work, check the condition of the fuses. flation kit in the rear luggage compart- Unclip the flap A on the driver’s side. ment.
  • Page 203 FUSES (2/4) Allocation of fuses (the presence and location of fuses depends on the vehicle equipment level) Note: fuses 1, 5, 6, 7, 12, 14, 15, 20, 32, 40 and 44 are not used. 5.25...
  • Page 204 FUSES (3/4) Number Allocation Number Allocation Number Allocation Passenger compartment Rear fog lights, registration interior lighting, luggage compartment lighting, plate lights Passenger side window bonnet lighting, air control conditioning, gearbox, ABS/ESC brake lights unit (continued) Driver’s electric window engine start button, rain Service relay sensor/light, ESP/ ABS Interior lighting, bonnet...
  • Page 205 FUSES (4/4) Some functions are protected by fuses, located: – in the front compartment in the C unit; – in the rear engine compartment in the D unit. However, because of their reduced accessibility, we advise you to have your fuses replaced by an approved Dealer.

  • Page 206: Fitting A Radio

    FITTING A RADIO – In all cases, it is very important to follow the manufacturer’s instruc- tions carefully. – The specifications of the brack- Door speakers 1 ets and wires (available from our network) vary depending on the To install any equipment, please con- equipment level of your vehicle sult an authorised dealer.

  • Page 207: Accessories

    ACCESSORIES Electrical and electronic accessories Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level, po- sition of the aerial, etc.), make sure it is compatible with your vehicle. You can get advice from an authorised dealer. Connect accessories with a maximum power of 120 Watts only.
  • Page 208 WIPER BLADES: replacement To refit To refit the wiper blade, proceed in the reverse order to removal. Ensure that the blade is locked and the screen washer fluid pipe is connected properly. As the windscreen wiper blades 1 are specific to the windscreen, they must be replaced with equivalent windscreen wiper blades.

  • Page 209: Towing: Breakdown

    TOWING: breakdown recovery (1/2) Before towing, put the gearbox in posi- With the engine switched off, the gear- tion N, unlock the steering column and box is no longer lubricated. Transport release the parking brake. the vehicle on a flatbed lorry. If the gearbox cannot be set to posi- In exceptional circumstances, you tion N, please contact an authorised...
  • Page 210 TOWING: breakdown recovery (2/2) Access to the towing point Press zone A and keep depressed while pulling zone B to open flap 4. Screw in the towing eye 3 fully: as far as possible by hand at first, then finish by tightening it using the wheelbrace.

  • Page 211: Operating Faults

    OPERATING FAULTS (1/6) The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact an approved Dealer as soon as possible. Using the card POSSIBLE CAUSES WHAT TO DO The card does not lock or unlock the Card battery is flat.
  • Page 212 OPERATING FAULTS (2/6) The starter is activated POSSIBLE CAUSES ACTION REQUIRED The instrument panel indicator lights Battery terminals not tight, bat- Retighten or reconnect the terminals, or clean them if are weak or fail to light up and the tery terminals disconnected or they are oxidised.
  • Page 213 OPERATING FAULTS (3/6) On the road POSSIBLE CAUSES WHAT TO DO Vibrations. Tyres not inflated to correct pres- Check the tyre pressures: if this is not the sures, incorrectly balanced or dam- problem, have them checked by an ap- aged. proved Dealer.
  • Page 214 OPERATING FAULTS (4/6) On the road POSSIBLE CAUSES WHAT TO DO Steering becomes heavy. Assistance overheating. Drive carefully at reduced speed, be aware of the level of force in the steering wheel Fault with the electric assistance needed to turn the wheels. Consult an ap- motor.
  • Page 215 OPERATING FAULTS (5/6) Electrical equipment POSSIBLE CAUSES WHAT TO DO The wipers do not work. Wiper blades stuck. Free the blades before using the wipers. Faulty electrical circuit. Consult an approved dealer. Fuse damaged. Replace the fuse or have it replaced; refer to the information on “Fuses”...
  • Page 216 OPERATING FAULTS (6/6) Electrical equipment POSSIBLE CAUSES WHAT TO DO Traces of condensation in the head- Traces of condensation may be a nat- lights or rear lights. ural phenomenon caused by varia- tions in temperature and humidity. In this case, the traces will disappear slowly once the lights are switched The front seat belt reminder light An object is stuck between the floor...
  • Page 217 Section 6: Technical specifications Vehicle identification plate ............Engine specifications .

  • Page 218: Vehicle Identification Plate

    VEHICLE IDENTIFICATION PLATES The information shown on the ve- 4 MMAC (Maximum permissible hicle identification plate should be all-up weight). quoted on all correspondence or 5 MTR (Gross Train Weight). orders. 6 MMTA (Maximum Permissible Weight) front axle. The presence and location of the in- 7 MMTA rear axle.

  • Page 219: Engine Specifications

    ENGINE SPECIFICATIONS Versions 1.8 Tce Engine type M5P Turbo (see engine plate) Cubic capacity (cc) 1798 Type of fuel It is essential that you use unleaded petrol of the octane rating stated on the label inside the fuel Octane rating filler flap.

  • Page 220: Dimensions

    DIMENSIONS (in metres) 0,912 2,420 0,848 1,539 to 1,551 4,180 1,261* 1,552 to 1,564 1,980 * unladen...

  • Page 221: Weights

    WEIGHTS (in kg) The weights indicated for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Consult your approved Dealer. Maximum permissible all-up weight (MMAC) Weights are indicated on the vehicle identification plate (refer to Maximum permissible all-up weight (MMTA) the information on “Vehicle identification plates”...

  • Page 222: Replacement Parts And Repairs

    REPLACEMENT PARTS AND REPAIRS Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same level of quality as the parts fitted originally. If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the repair order.

  • Page 223: Service Sheets

    SERVICE SHEETS (1/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 224 SERVICE SHEETS (2/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 225 SERVICE SHEETS (3/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 226 SERVICE SHEETS (4/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 227 SERVICE SHEETS (5/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 228 SERVICE SHEETS (6/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...

  • Page 229: Anticorrosion Check

    ANTICORROSION CHECK (1/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.13...
  • Page 230 ANTICORROSION CHECK (2/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.14...
  • Page 231 ANTICORROSION CHECK (3/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.15...
  • Page 232 ANTICORROSION CHECK (4/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.16...
  • Page 233 ANTICORROSION CHECK (5/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.17...
  • Page 234 ANTICORROSION CHECK (6/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.18...
  • Page 235 ALPHABETICAL INDEX (1/5) catalytic converter........... 2.15 – 2.16 ABS ..............1.47, 2.29 → 2.33 central door locking ......1.5 → 1.10, 1.13 → 1.15 accessories................ 5.29 changing a bulb ..........5.14 → 5.17, 5.17 accessories socket ............3.16 changing a wheel............5.8 – 5.9 additional methods of restraint changing gear ............2.45 →...
  • Page 236 ALPHABETICAL INDEX (2/5) driving position front engine cover ..............4.9 settings ............1.19 → 1.21 front passenger air bag deactivation ......... 1.37 driving recommendations ........2.21 → 2.23 front seat adjustment ........1.17 – 1.18, 1.18 front seats adjustment ............1.17 → 1.19 ECO driving ............2.21 →...
  • Page 237 ALPHABETICAL INDEX (3/5) main beam headlights ........ 1.44, 1.72, 5.14 indicators ............1.74, 5.14 – 5.15 reversing lights ............. 5.15 indicators: side lights ..........1.71, 5.14 – 5.15 direction indicators ............1.74 lights-on warning buzzer........... 1.12, 1.72 exterior temperature indicator ........1.68 load permitted on the roof............
  • Page 238 ALPHABETICAL INDEX (4/5) radio................... 3.10 tailgate ................3.18 range with fuel ..............1.48 tank rear view camera ............ 2.43 – 2.44 Brake fluid ..............4.10 rear view mirrors ............. 1.69 – 1.70 Coolant ................4.8 remote control card: battery......5.18 – 5.19, 5.19 tanks and reservoirs: remote control card: use ......
  • Page 239 ALPHABETICAL INDEX (5/5) warning lights............1.44 → 1.62 washing ..............4.17 → 4.19 weights ................6.5 wheelbrace ................5.7 wheels (safety) ............5.10 → 5.13 windscreen de-icing/demisting ........3.4 → 3.7 windscreen washer ........1.75 – 1.76, 4.13 wiper blades ..............5.30 wipers blades ................5.30 wipers ..............
  • Page 242 à6020019266û ê ê ä SOCIÉTÉ DES AUTOMOBILES ALPINE, SA par actions simplifiée à associé unique au capital de 3 567 564 € AVENUE DE BREAUTE, 76200 DIEPPE - SIRET 662 750 074 / SITE INTERNET : alpinecars.com NU 1171-8 - 60 20 019 266 - 03/2021 - Édition anglaise...

Table of Contents

Save PDF