Summary of Contents for Zippity PREMIUM VINYL PRIVACY SCREEN
Page 1
ZP19014 ASSEMBLY INSTRUCTIONS PREMIUM ASSEMBLY INSTRUCTIONS VINYL PRIVACY SCREEN ZP19014 (48”W X 48”H) 60 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code WWW.ZIPPITY-OUTDOOR.COM WWW.ZIPPITY-OUTDOOR.COM VER. 060921...
Page 2
If you experience any further trouble with your product, please contact our customer service department. parts.nychbrands.com support@zippity-outdoor.com 704-892-5222 877-234-6196 Customer service agents are available to take calls weekdays from 8am- 5pm EST. If you call outside of business hours, please leave a voicemail.
Page 3
ZP19014 ASSEMBLY INSTRUCTIONS 48 in 46 in Ground 2 in 12 in 48 in Ground 48 in WWW.ZIPPITY-OUTDOOR.COM...
Page 4
Right Post (1) 3” x 3” x 47½” 3” x 3” x 47½” 3” x 3” x 47½” Board Wall (8) Ground Stake (2) ⅞” x 11” x 44” ⅞” x 1½” x 18” 2½” Self-Drilling Stainless Steel Screw (10) WWW.ZIPPITY-OUTDOOR.COM...
Page 5
STEP 2.2 Note: Make sure you install the 2½” self-drilling stainless steel screws Fasten each post to the board wall using (2) straight through and not at an angle. 2½” Self-Drilling Stainless Steel Screws (G). Top View. Top View. WWW.ZIPPITY-OUTDOOR.COM...
Page 6
Then posts as illustrated. use a claw hammer to loosen the first 6 to 8 inches of hard-packed soil as illustrated. Add water to loosen the soil as necessary. WWW.ZIPPITY-OUTDOOR.COM...
Page 7
2x4 with a hammer. Repeat for the other ground stake. STEP 3.4 Fasten both ground stakes to the left and right posts using the pre-drilled holes and (2) 2½” self-drilling stainless steel screws. WWW.ZIPPITY-OUTDOOR.COM...
Page 8
CONCRETE OR WOOD SURFACE Use galvanized steel L-brackets as illustrated. Purchase both the brackets and necessary hardware for mounting to a concrete or wood surface from your local hardware store. Concrete screws or wood screws (NOT INCLUDED). Galvanized L brackets (NOT INCLUDED). WWW.ZIPPITY-OUTDOOR.COM...
Page 9
ZP19014 ASSEMBLY INSTRUCTIONS INSTALL POST CAPS STEP 4: STEP 4.1 Finish the assembly by pushing the Post Caps down over the top of the posts as illustrated. WWW.ZIPPITY-OUTDOOR.COM...