Summary of Contents for Neomitis Anthemys Neoboost EcoSens Chrome
Page 1
Sens ® compliant RF remote control EUROPE REGISTERED PATENT Chrome version Anthracite version White version ® Anthemys Neoboost EcoSens ® Patented extra-sl i m smart bl o wer. A combi n ati o n of a styl i s h desi g n wi t h peak performance, that anti c i p ates your comfort needs and guarantees energy savi n gs thanks to the smart features of the EcoSens Pack.
Page 3
INSTALLING THE HEATING DEVICE WARNINGS AND PRECAUTIONS the manufacturer’s warranty. - Do not use the appliance outdoors. must not be used for other purposes. - This appliance can be used by children aged from 8 years and above and persons with reduced physical heat source.
Page 4
The normal cleaning is the responsibility of an adult zone 2 and Out of Zone in bathrooms, but protected from splashing water. touched by a person located Zone Zone 1 Zone 2 Zone...
Page 5
PROCEDURE - The power supply of the device must have a means tor of at least 3 mm in accordance with local regula- age used does indeed match that listed on the device. to earth is prohibited. must be connected in an electrical plicable standards.
Page 6
Stage 2 Find the power of your electric towel rails and drill the cor- responding holes into the wall. Stage 3 plate then screw the ets of the electric towel rails into the wall. depth Support Compensator damper pad CLIC version).
Page 7
The towel rails is now secured and CLIC CLIC ports. CLIC CLIC low the head of the mobile support. edges of the device during transport. CLIC ) is ). This...
Page 8
OVERVIEW which your bathroom heats up and also allows damp clothes and towels to get many years of service. or Stop command. ® meter. During an unoccupied period, the towel - MY ECOSENS ® The towel rails out any prior adjustment, this enables it to understand and memorise your of the room, ambient temperature, desired temperature, seasonality, the the processors BENEFITS...
Page 9
Auto mode Comfort mode Eco mode - Mechanical strenght, high resistance to weight and heat. supplied with a wall base or a table stand, allowing you to remotely control the Anthemys Neoboost EcoSens ® OPERATING POWER ON/HEATING STANDBY The device is in Auto mode, the Auto and Comfort modes are selected and the preset temperature appears.
Page 10
BOOST FEATURE by default. schedule of your device to your needs, depending on the season, whether your home is occupied or not. By pressing the selects the required mode. minute. • cally change from Comfort mode to Eco mode according to the established programme. If you do not want to use the programming feature.
Page 11
the Boost mode is always ac- temperature is higher played, the Boost symbol and temperature. the display. When the temper- Average temperature ends. temperature is higher to slightly reduce the temperature appears. Ideal temperature. temperature is lower Seconds appear and begin to count You can access the Comfort temperature set up from the Auto and Comfort Using increase the temperature of a cold room.
Page 12
UNLOCK switching to the Defrost or standby mode. The device will be in permanent comfort and will memorise your habits to symbol appears on the display, coming from an energy manager for results from the Self-learning algorithm. From the Standby mode, press programming mode.
Page 13
Select using onds. Save by pressing , press shortly. Select the date using . The cursor moves above prog. Save by pressing 1 2 3 4 5 6 7 5- To change and/or allocate programmes press 3- With The towel rails is delivered by default with the self-learning mode enabled as described on .
Page 14
Save by pressing by pressing Display area Monday Tuesday Wednesday twice. Thursday Friday Saturday Sunday press again. appears on the display. 1 2 3 4 5 6 7 2- By pressing , you can change temporarily the desired tem- 1 2 3 4 5 6 7 3- Chose the programme you want for this day with Save by pressing...
Page 15
PACK +: OPEN WINDOW if a temperature rise is detected, the device may return to the previ- ECOSENS® TECHNOLOGY: OCCUPANCY DETECTION, by the air caused by open door. If this is a problem, we recommend that you . You can, these.
Page 16
1- The device is in Auto mode. The central control unit sent an Eco order son that crosses the area will be detected by the infrared sensor. Active area Inactive area 2- By pressing Your device can be controlled by a central control unit through a pilot wire, the programmer.
Page 17
symbol appears control. device and the remote control. seconds. Then the level appears on the display. Occupancy detector = Eco mote control. - Move the remote control closer to the blower. remote control. seconds. The remote control and the blower are not bonded together at the factory, symbol disappears from the display, the remote control and the pai- ring of the device will be cancelled.
Page 18
USER SETTINGS ACCESS seconds twice Eco mode temperature lowering-level Super comfort BACKLIGHT SETTING to obtain the temperature level you require. pressed. twice. SETTING THE FROST PROTECTION to obtain the temperature you require. twice. twice.
Page 19
By default, the Super comfort is enabled. twice. OF AUTHORISED BOOST appears on the display. to enable or disable the Super comfort. = Super Comfort enabled. = Super Comfort disabled. twice. the temperature from being set below that temperature. then save by pressing twice.
Page 20
Enabled twice. RESTORING FACTORY SETTINGS appears on the display. to select Disabled...
Page 21
INSTALLER SETTINGS ACCESS = Installer seconds twice seconds - Whatever the current programme, the device will not perform an automat- absence. tector, it will no longer be applied. the devices inbuilt algorithms will savings throughout the programmed increase and decrease phases. In this mode, a slight drop in the temperature level at the beginning and the device intelligence during the programmed increase and decrease phases.
Page 22
priority to comfort. appears on the display. appears on the display. PIN CODE LOCK feature. appears on the display. 1- When appears, press again to save.
Page 24
EXPERT SETTINGS ACCESS seconds twice seconds Long and simultaneous Decrease the temperature measured by the ambient temperature sensor by ature of the device.
Page 25
Increase the temperature measured by the ambient temperature sensor by ture and the requested temperature is reduced TROUBLESHOOTING DIAGNOSIS SUPPORT To validate press touch according to the methods of use. for the product. changes would result in control anomalies. than the others, 1- When the temperature measured by the sensor appears, press for at least 3 seconds.
Page 26
graph TECHNICAL INFORMATION the programming of the central. The device can be cleaned with a damp cloth; device in permanent Comfort Eco passage. from the air aspirated into the room. maturely. This will not damage the product. appears on the display. slot.
Page 27
S/N 27330100001 S/N 2 27330100001 ing to environment. NEOMITIS LTD – 16 Great Queen Street, Covent Garden, London, WC2B 5AH UK NEOMITIS LTD – 16 Great Queen Street t, Covent Gar den, London, WC2B 5AH UK CO-INTECH - 258 rue du champ de courses - 38780 PONT-EVEQUE FRANCE...
Page 28
The symbol Unit Nominal heat output At nominal heat output None At minimum heat output None Unit Manual heat charge control, with integrated thermostat Fan assisted heat output Single stage heat output and no room temperature control Two or more manual stages, no room temperature control With mechanic thermostat room temperature control With electronic room temperature control...
Page 29
LEGAL GUARANTEE The onus is on the customer to provide evidence of the dates referred to in the claim. Defects and damage to the the guarantee provided by our company. The guarantee does not apply to equipment already resold by our purchaser. All guarantees are invalid as soon as our products have been used under usage or performance circumstances We shall not be held responsible for patent defects or missing parts of which the pur-...
Page 32
NEOMITIS ® LIMITED - 16 Great Queen Street, Covent Garden, London, WC2B 5AH UNITED KINGDOM Registered in England and Wales No: 9543404 www.neomitis.com...
Need help?
Do you have a question about the Anthemys Neoboost EcoSens Chrome and is the answer not in the manual?
Questions and answers