Advertisement
DISASSEMBLY INSTRUCTION - 1/2
9) Remove MOTOR assy.
10) Remove FRONT assy.
11) Remove Panel SW assy.
(Extend FRAME SUB assy lightly and remove it at front side)
12) Remove SHAFT assy.
(Remove the washer. See figure)
Reassemble MOTOR assy at the position that is arranged with hole of GEAR CAM and hole of FRAME SUB assy like the figure)
Put the tip of a lever Assy gear at between the marks of GEAR CAM and reassemble FRONT assy.
(Extend FRAME SUB assy lightly.)
Put GEAR CAM at the position that hole of FRAME SUB assy can be seen from the left and right side hole of GEAR CAM, and reassemble SHAFT assy.
-6-
Advertisement
