Note: Remove the film that covers the thermal pad (if any) when installing the M.2 solid-state drive and
the heat sink.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 38.
2. Remove the front bezel. See "Front bezel" on page 38.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 40.
4. Remove the drive bay assembly. See "M.2 solid-state drive and heat sink" on page 45.
Removal steps
48
Lenovo V55t Gen 2 User Guide