Advertisement
PAIRING AND POWERING OFF EARBUDS:
Notes for Pairing:
•
Keep the distance between your smartphone and the Earbuds within 3 ft (for pairing only).
•
The Earbuds must be powered ON in order to pair.
Before attempting to pair, make sure that your smartphone or tablet's Bluetooth function is
•
enabled under Settings. Specific pairing procedures will be different depending on different
brands and models. For detailed information on pairing, please refer to your device's user
manual.
STEP 1: Take Earbuds out of charging case and they will power on automatically. If Earbuds are already
out of charging case, then gently press and hold the multifunction buttons on each earbud for 8
seconds. You will see the LED flash white and blue on each side, indicating that the power is ON. Your
Earbuds are now in Pairing Mode.
STEP 2: Open your smart device's Settings menu and activate Bluetooth pairing. Your smart device
(tablet, smartphone, etc.) will perform a search for local Bluetooth enabled products; after a few
seconds you will see 'Air3' appear on the list.
STEP 3: Select 'Air3' from the list. Once selected, your Earbuds are ready for use.*
*You may wish to only use one earbud (single mode) instead of using the pair together (dual mode).
When this is the case, simply turn on the earbud you wish to use and follow the same steps while
keeping the other earbud turned off. You will have the same general functionality.
AUTO-PAIRING:
Once you have successfully paired your earbuds to a Bluetooth-enabled device, that device will
remember and recognize your earbuds for automatic re-pairing. This means that the next time you wish
to use your earbuds with that same smart device, pairing will happen automatically and without the
need for you to revisit your device's Bluetooth display screen.
POWER OFF EACH INDIVIDUAL EARBUD:
Press and hold the Multifunction Button on either earbud for 5 seconds, both Earbuds will power off.
Air 3 True Wireless Earbuds
Model #: 14321, 14281, 14591, WL14681
Advertisement
Table of Contents
Summary of Contents for squarespace Air 3
- Page 1 Air 3 True Wireless Earbuds Model #: 14321, 14281, 14591, WL14681 PAIRING AND POWERING OFF EARBUDS: Notes for Pairing: • Keep the distance between your smartphone and the Earbuds within 3 ft (for pairing only). • The Earbuds must be powered ON in order to pair.
- Page 2 Note: If your device’s Bluetooth version is below version 2.1, you may need to enter the password ‘0000’. READING THE LED INDICATOR: LED INDICATION MEANING LED flashes white/blue after holding multi-fn button The earbuds have just powered for 5 seconds. on and are in pairing mode.
- Page 3 CHARGING YOUR EARBUDS & CASE: 1) Insert the earbuds into their corresponding charging chamber in the case. 2) Magnetic charging connectors should lock earbuds securely into charging chambers. Close the case. 3) Insert the included Type-C USB charging cable into the back of the charging case and connect to a power source (such as a power bank, AC wall adapter, etc.) 4) You will see the earbuds flash white to indicate that automatic charging has begun.
Need help?
Do you have a question about the Air 3 and is the answer not in the manual?
Questions and answers