Corsair iCUE VOID RGB ELITE USB Manual page 3

ENGLISH
CONTROLS AND FEATURES
Headband adjustment
A
B
Cantilevered arm + hinge
C
Mute button
D Jog dial (volume + EQ)
E
F
1
E Microfiber covered ear pads
F Microphone foam windscreen (removable)
A
B
C
D
GETTING STARTED WITH YOUR VOID RGB ELITE USB HEADSET
> Connect your headset to a USB port on your PC.
> Go to corsair.com/support/downloads to download the CORSAIR Utility Engine ("iCUE") Software.
Using the iCUE software will enable the full feature set of your headset.
> Note: If the headset is used without software, some features will be disabled.
> Install the iCUE software on a PC running Windows
> After installation is complete, reboot your PC, and launch iCUE.
iCUE SOFTWARE CAN BE USED TO
> Choose your RGB color preference and light intensity.
> Select and customize audio equalizer (EQ) settings.
> Adjust headset volume, microphone input volume, and microphone side tone.
> Set 7.1 surround sound on or off.
Note: Prolonged listening at high volumes may adversely affect your hearing.
Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.
HEADSET AUDIO SETTINGS
Short key press (0.1-0.5 seconds) on JOG DIAL
D
Medium key press (0.6-2 seconds) on JOG DIAL
HEADSET MIC CONTROL
Short key press (0.1-0.5 seconds) on mic mute button
Long key press (2-4 seconds) on mic mute button
Note: iCUE software can also be used to control these features.
7, Windows 8.1, Windows 10 or later.
® ® ®
toggles EQ.
toggles 7.1 surround sound.
D
toggles mute on and off.
C
toggles side tone on and off.
C
ENGLISH
2