Changing Menu Settings - Epson PowerLite 52c User Manual

Changing Menu Settings

Use the buttons on the remote control to access the menus and change
settings. Follow these steps:
1. Press the button on the remote control to display the main
Menu
menu screen:
Video
Audio
Menus
Setting
Advanced
About
Reset All
: Select
The menus are listed on the left, and the options available for the
highlighted menu are shown on the right.
2. Press up or down on the directional (arrow) buttons to scroll
through the menu list.
3. When the menu you want is highlighted, press the
to select it. The highlight moves to the first option for that menu.
4. Use the directional buttons to scroll through the list of options.
(If a computer or video source isn't connected, certain options
may be unavailable.)
5. Use the directional buttons and
setting for the selected option. Enabled settings have a green
highlight.
6. Press the button to return to the main menu. Your changes
ESC
are saved automatically.
7. Press again (or the
ESC
Menu options
Position
Adjust
0000
Tracking :
Sync . : 0
-
Brightness : 0
Contrast : -
0
Sharpness : 0 -
Color Mode Select
Input Signal :
RGB
YUV( YCbCr YPbPr)
Auto Setup :
ON OFF
Reset
Execute
: Enter
button to change the
Enter
button) to exit the menu system.
Menu
Menu
+
+
+
[Normal ]
button
Enter
Fine-tuning the Projector
Directional buttons
Power
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
note
If you want to go back to the
default settings on any
menu, select Reset, press
Enter, select Yes, and then
press Enter.
33