How Do Deco Electric Motorcycle Works - Deco Hannah Manual

HOW DO DECO ELECTRIC MOTORCYCLE WORKS?

1. Open the cushion and turn the circuit breaker switch to ON.
2. Insert a key and twist it to the ON position.
3. Before start controlling the throttle on a motorcycle, release the parking brake (by pressing P on
the right-hand side) and releasing the brake. Otherwise electric motorcycles will not be able to
drive.
4. Before using Deco electric motorcycle. Please check the following equipment.
4.1 BRAKES
Try moving the vehicle forward while using the front and rear brake levers. Make sure
that the vehicle can't be moved forward while using the brakes. Otherwise, the brake is loose.
You need to tighten the brake until the brake is stable enough to ride.
4.2 THROTTLE
Press the P switch before using the throttle to disengage the parking gear, then slowly
hold the throttle to check if it works smoothly. The throttle should snap back when you let go.
20