www.FireplaceRemoteControls.com
Included with the F45 Universal Remote:
QTY.
PART#
DESCRIPTION
1
W660-0066
Transmitter
2
N043-0002
"AAA" Batteries
1
W080-0930
Wall Mount Cradle
1
W660-0076
Receiver
1
W500-0405
Wall Faceplate
1
W500-0404
Fireplace Mounting Plate
1
W660-0080
Slide Switch
4
W043-0002
"AA" Batteries
1. RECEIVER INSTALLATION
The receiver (W660-0076) can be installed as either a wall mount
steps below after having completed step 1.1.
Turn off the electrical power and the gas supply to the appliance. Make sure the slide
switch on the receiver is set to the "OFF" position.
1.1 Either disconnect the existing switch wiring at the valve, or connect in parallel with
any other switch wiring at the valve. For millivolt switch wiring attach the wires to terminal 1
(marked TPTH) and terminal 3 (marked TH) of the gas valve from the output terminals on the
receiver. FIGURE 1 NOTE: If connecting the receiver to an appliance with electronic
ignition, connect the receiver wires to the two leads from the control module, identifi ed
as switch wires. (It may be necessary to remove the spade connectors and join the
wires using wire connectors)
1.2 Press the battery compartment slightly into the receiver and release enabling the battery compartment to pop out. Pull off the slide switch. Slide the
receiver out of the wall mounting plate. FIGURE 2
1.3 Using the screws provided secure the receiver and the wall face plate to an existing junction box. FIGURE 2
1.4 Replace the black slide switch with the white one included to match the cover plate. Place 4 AA batteries into the battery compartment and slide the
compartment back into the receiver. FIGURE 3
1.5 Turn on the electrical power and the gas supply to the appliance.
WALL MOUNT
INSTALLATION
SLIDE
BA T.L OW
SWITCH
FIGURE 2
WALL FACEPLATE
F45, F60 AND F60D UNIVERSAL REMOTE
INSTALLATION AND OPERATION
INSTRUCTIONS
Included with the F60 Universal Remote:
QTY.
PART#
1
W660-0067
2
N043-0002
1
W080-0930
1
W660-0076
1
W500-0405
1
W500-0404
1
W660-0080
4
W043-0002
**FOR OTHER AVAILABLE COLOURS, ADD THESE LETTERS TO THE BASE PART NUMBER:
A RECEIVER WALL MOUNT
FREQUENCY
ADJUSTMENT
SCREW
JUNCTION
BOX
RECEIVER
DESCRIPTION
Transmitter
"AAA" Batteries
Wall Mount Cradle
Receiver
Wall Faceplate
Fireplace Mounting Plate
Slide Switch
"AA" Batteries
A
B
or a appliance mount
. Depending on your application, follow the applicable
FIGURE 1
BATTERY
INSTALLATION
STICKER
(See 7. FINISHING)
FIGURE 3
1.888.977.6849
Included with the F60D Universal Remote:
QTY.
PART#
DESCRIPTION
1
**W660-0087
Transmitter
2
N043-0002
"AAA" Batteries
1
**W080-1050
Wall Mount Cradle
1
W660-0076
Receiver
1
W500-0405
Wall Faceplate
1
W500-0404
Fireplace Mounting Plate
1
W660-0080
Slide Switch
4
W043-0002
"AA" Batteries
RECEIVER
BA T.L OW
BATTERY
COMPARTMENT
1
COLOUR
LETTER
BLACK
K
GREY
Y
RED
R
1
GAS VALVE
3