Operation; Switching The Amplifier On/Off; Bluetooth Operation; Volume Control - ROCK JAM RJKSK User Manual

Operation

Switching the Amplifier On/Off

Connect the Amplifier power cable to the socket at the back of the Amp, then connect the plug
to a mains power socket. Locate the power switch on the front of the Amplifier. Press the switch
towards "ON" to power on the Amp. The Power LED indicator will light up red. The Amplifier will
power up in Aux mode.
To turn the system off, press the switch towards "OFF" and disconnect from the mains socket.

Bluetooth Operation

The Amplifier included in the Karaoke Super-kit is Bluetooth compatible. Music can be played
through the Amp from a compatible Bluetooth device such as a mobile phone or tablet device.
Make sure the Amp is powered on. Press the MODE button until the Bluetooth Mode Indicator
flashes blue. A tone will also be heard.
Using your mobile phone or other Bluetooth enabled device, search for Bluetooth devices and
select 'RJKSK' from the list of devices found. The Bluetooth device should then connect to the
Amp. The Bluetooth Mode Indicator will become a solid light once successfully connected. You
will also hear a connection tone. The Amplifier will then connect automatically with a paired
device when it is in Bluetooth mode.
NOTE: The music can be controlled using both the buttons on the AMP or the connected
device.

Volume Control

Adjust the connected microphone volume by using the separate MIC 1 and MIC 2 Volume
controls.
The overall output (Main Volume) can be adjusted in two ways as follows;
• Adjust the volume on the Bluetooth device, mobile phone, tablet computer, iPad etc.
• Turn the Main Volume control on the front of the Amp up or down.
8