Mack MCT-8017BL Instruction Manual

EN

1. FUNCTION INSTRUCTION

1）Calendar: 100 years (from A.D.2000-01-01 to 2099-12-31). Time display is at AM0:00"DO" on
1/1/2009 when you turn on the clock at the first time.
2）One Alarm sound " BI-BI" and lasts for 2minutes.
3）Snooze function：1-20minutes. Default value is 5 minutes.
4）12/24 hours format transferable.
5）4 selectable languages for Day of the week display: German, English, French and Italian.
6）Thermometer: temperature is tested automatically for the scope from 0 to 50 degrees Celsius,
temperature display can shift between (
7）Hygrometer: Hygrometer is tested automatically for the scope from 20% to 95%.
8）Backlight function.

2. KEY INSTRUCTION

1.【SET】: hold this key for a while to enter into normal time setting mode.
2.【ALARM】: hold this key for a while to enter into alarm time setting mode.
3.【12/24】：press this key to transfer 12/24 hours format display .
4.【UP】: in alarm time mode, press this key to turn on/off the alarm.
5.【DOWN】: press this key to shift between
6.【SNOOZE/LIGHT】: press this key to light up the back light and snooze function.

3. TIME SETTING INSTRUCTION

In normal display, hold "SET" key for a while to enter into time setting mode. Firstly "HOUR" will flash,
press "UP" or "DOWN" key to choose the value, then press "SET" to shift setting to "MINUTE", use
"UP"or "DOWN" key to complete the following setting sequence (hold 'UP' key or 'DOWN' key for quick
adjustment)
HOUR → MINUTE → YEAR → MONTH → DAY → LANGUAGE SELECTION FOR DAY DISPLAY
→ CONFIRM
Note :
1) The clock will automatically exit the setting mode with saved setting data if there is no any operation
in 30 seconds.
2) Day automatically changes as date goes by.
3) 4 selectable languages for Day display: German, English, French and Italian.

4. ALARM SETTING INSTRUCTION

1) Alarm ON/OFF
In alarm time mode, Press "UP" key to turn on / off alarm function.
2) Alarm time setting
In normal display, hold 'ALARM' key for seconds to enter into alarm setting mode. Firstly the digits of
"HOUR" will flash, then press 'ALARM' key to shift setting to "MINUTE". Use 'UP' or 'Down' key to com-
plete the following setting sequence (hold 'UP' key or 'DOWN' key for quick adjustment) :
3) When alarm is ringing, press 'SNOOZE/LIGHT' key to enter into snooze mode. Press any other keys
to stop alarm sound.

5. BATTERY INSTRUCTION

This clock uses 2 x AA batteries (not included)
MCT-8017BL
Instruction Manual
C/ F) mode.
O O
C/
O O
HOUR → MINUTES → SNOOZE TIME → EXIT
F modes.
is displayed means the alarm is turned on.
-1-