Directed XPRESSKIT GM9 Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Extender
  5. XPRESSKIT GM9
  6. Manual
Directed XPRESSKIT GM9 Manual

Directed XPRESSKIT GM9 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Platform: DBALL2
Firmware: GM9 Range Extender Ready (RXT) Installation v.2.05+
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
The GM9 firmware for DBALL2 is an all-in-one door lock and override module compatible with
specific Buick, Cadillac,Chevrolet and GMC vehicles. This guide supports the installation of a
DBALL2 in Range Extender Ready (RXT) mode with an RF System or a SmartStart (both sold
separately).
This module can only be flashed and configured using XpressVIP at www.directechs.com or
using the Directechs Mobile application for smartphones. Refer to the Module Programming
section on page 7 for more information.
Range Extender Ready (RXT) is used to dramatically increase the factory remote start activation range
compared to the factory transmitter. Refer to the Quick Reference Guide for more information.
Important!
▪This product is ONLY compatible with vehicles equipped with a factory-installed remote starter.
▪This guide is compatible with the GM9 firmware version 2.05 and later.
Index
Vehicle Application Guide...................................................................................................................................................
Installation (Wiring Diagram & Vehicle Wiring Reference Chart)........................................................................................
SmartStart/XL202 Installation Notes..................................................................................................................................
Programming
Module Programming.........................................................................................................................................................
Module Reset.....................................................................................................................................................................
Hard Reset.........................................................................................................................................................................
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Limited One-Year Consumer Warranty..............................................................................................................................
Quick Reference Guide......................................................................................................................................................
SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Range
Extender Ready (RXT) mode without the use of a remote starter. See the Module Programming section for
more information.
® Buick, Cadillac, and Chevrolet are registered trademarks and property of their respective companies.
Rev.: 20170407
2
3
6
7
8
8
9
10
11
13
14
© 2017 Directed. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPRESSKIT GM9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Directed XPRESSKIT GM9

  • Page 1: Table Of Contents

    SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Range Extender Ready (RXT) mode without the use of a remote starter. See the Module Programming section for more information. ® Buick, Cadillac, and Chevrolet are registered trademarks and property of their respective companies. © 2017 Directed. All rights reserved.

  • Page 2: Vehicle Application Guide

    • • • • Yukon (Smart Key) • • • • • • • • • • • Legend: DL: OE Door Lock & Alarm Controls RS: Engine Start & Status ST: Function/Feature Status © 2017 Directed. All rights reserved.

  • Page 3: Installation (Wiring Diagram & Vehicle Wiring Reference Chart)

    You can connect to either a XL202 RFTD OR a SmartStart module. Refer to the SmartStart/XL202 Installation Notes for more information. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 4 CAN Low Data OBDII Diagnostic Connector. Black Red/White Ground Black Cadillac XTS (Smart Key) 2013-2016 SW CAN Lt.Green Data CAN High Lt.Blue Data CAN Low White Data OBDII Diagnostic Connector. Black Red/Lt.Green Ground Black © 2017 Directed. All rights reserved.
  • Page 5 Data Red/Brown Ground Black Cadillac Escalade/Chevrolet Tahoe, Chevrolet Suburban/ GMC Yukon (Smart Key) 2015-2016 SW CAN Green Data HS CAN High Blue Data OBDII Diagnostic Connector. Black CAN Low White Data Red/Violet Ground Black © 2017 Directed. All rights reserved.

  • Page 6: Smartstart/Xl202 Installation Notes

    Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. RF Kit, PKE & SmartStart BT Combination Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. © 2017 Directed. All rights reserved.

  • Page 7: Module Programming

    Press once and hold the Push-to-Start button to & & ENGINE ENGINE PUSH HOLD START START turn the ignition ON. The LED flashes green. STOP STOP Flashes Green Go to the next page to complete the module programming. © 2017 Directed. All rights reserved.

  • Page 8: Module Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2017 Directed. All rights reserved.

  • Page 9: Feature & Option List

    A remote starter, for w hich the Safelock feature is active, w ill w ork perfectly w ith this option and w ill make it invisible to the user. © 2017 Directed. All rights reserved.

  • Page 10: Feature Programming

    No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.

  • Page 11: Led Diagnostics & Troubleshooting

    Flashes START ON command received. green install, it will show only if the ignition input wire is used. quickly Go to the next page to see the rest of the LED Diagnostics & Troubleshooting. © 2017 Directed. All rights reserved.
  • Page 12 Refer to Feature Flashes when RFTD feature is disabled. Programming section for more information. RXT start not possible when OEM system is Refer to the owner documentation to activate it. Flashes disabled. red x8 © 2017 Directed. All rights reserved.

  • Page 13: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...

  • Page 14: Quick Reference Guide

    Nothing to do but put the gear in drive and enjoy your vehicle. This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. © 2017 Directed. All rights reserved.
  • Page 15 The Runtime Reset feature allows the user to return the runtime to its predefined * This output is configurable. see your authorized installation center for more value. This can only performed ONCE per remote start. information. © 2017 Directed. All rights reserved.

  • Page 16: Smartstart Compatible

    3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new level of 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com.

Table of Contents