Acer CB272U User Manual page 29

System
Mode - Standard
Picture
Input
Color
Auto Source
Audio
DP Format
Wide Mode
Performance
PIP/PBP
OSD
Hot Key Assignment
System
DDC/CI
HDMI Black Level
Move Enter
Mode - Standard
Picture
Quick Start Mode
DPS
Color
Audio
Performance
OSD
System
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Input: Select the source from HDMI1(2.0), HDMI2(2.0), DP.
5. Auto Source: The default is "On", which can support auto search for signal source in
order.
Note: Surround application must set Auto Source is "Off".
6. DP Format: Default is DP1.2, can selection support DP1.1,1 or DP1.2 format.
7. Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
8. PIP/PBP settings
-----------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously.
2. Under PIP & PBP mode, "Auto search" function is unavailable. The PIP/PBP
signal source needs to be selected manually.
HDMI 1
HDMI 2
DP
X: Does not support PIP/PBP function in this input combination
HDMI
On
DP 1.2
Full
X
On
Normal
Off
Off
X
PIP/PBP & Input status
HDMI 1
--
X
O
HDMI 2
X
--
O
DP
O
O
--