Motorola A840 CDMA2000 Manual page 85

All manuals and user guides at all-guides.com
emergency call, use your phone keypad to dial and send
the number.
Action
1 Press and release the voice recognition key on
the right side of the phone.
Your phone displays Say a command and plays the
same prompt out loud.
2 Say "Digit Dial."
3 When prompted, say the phone number.
If the phone recognizes the number, it dials that
number.
If the phone asks you to repeat a number, say it
again. If the number is not valid or is not
recognized, the phone does not place the call.
If the phone does not recognize the number, it
displays a list of up to 3 numbers and asks, "Did
you say ..." followed by the first number in the
list.
• If the number is correct, say "Yes" to dial
that number.
or
• If the number is not correct, say "No" to go
to the next number.
or
83