Advertisement
model no. 060-0570-8 | contact us: 1.866.523.5218
LED SWEEP
The LED Sweep (2) is designed to detect some problems that can arise with the inverter.
LED Sweep indicates problems (see table below):
LED Sweep
Flashes once per second for about
8 seconds
Flashes almost three times per
second for about 3 seconds
INPUT OVER-VOLTAGE PROTECTION
The inverter has a feature of input over-voltage protection. When the inverter detects the
input voltage is over 55 V, it automatically activates the protection circuit. The inverter
will shut down and enter a sleeping state.
OUTPUT SHORT CIRCUIT PROTECTION
The inverter has a feature of output short circuit protection. When the output short circuit
occurs, the inverter automatically activates the protection circuit and suspends working.
When the short circuit disappears, the inverter can work normally.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time allow brake fluid, gasoline,
petroleum-based products, penetrating oils, etc. to come in
contact with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal injury.
WARNING: To avoid serious personal injury, always remove
the battery pack from the tool when cleaning or performing any
maintenance.
WARNING: When servicing, use only identical Yardworks®
replacement parts. Use of any other parts may create a hazard
or cause product damage. To ensure safety and reliability, all
repairs should be performed by a qualified service technician.
Battery low level warning (<15%)
Consider changing or charging the battery.
AC over current protection.
Status
11
Advertisement
