Product Features; Use - Cuisinart RWO100E Manual

Wine opener
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10

3. PRODUCT FEATURES

1. and 7. Vacuum sealer
2. Charging port (not shown)
3. Cork ejector button (not shown)
4. Corkscrew
5. and 8. Foil Cutter
6. Aerator
9. USB lead and charging adaptor

4. USE

A. CHARGING YOUR WINE OPENER
The batteries in your wine opener have not been fully charged. Before using, the batteries must be
charged until all three blue lights are illuminated. With a full charge, your wine opener will open
around 50 bottles of wine. Your wine opener will be fully charged in approximately 2.5 hours.
N.B. To charge the main unit, insert the Micro USB end of charging lead into the charging port at
the back of the main unit. Plug the USB end directly into the adapter plug and then into a mains
supply outlet.
Battery Life Indicator Lights
The indicator lights will flash blue, when the battery is being charged. When all three lights are
illuminated, this means the battery is fully charged and is then ready to use. As the battery starts
to run down, the indicator lights will turn off. The battery will need to be recharged when the last
indicator light is flashing. If the battery has completely run down on the unit, it will not operate.
N.B. The Wine Opener cannot be used while it is plugged in and charging.
B. FOIL CUTTER
For your convenience, this unit has a foil cutter, which is stored in the base of the unit. Before
removing the cork, you must remove any foil from the bottle. Attach the foil cutter to the top
of the wine bottle. Keep your hand on the lower part of the bottle and turn the foil cutter in a
twisting motion to remove the foil. The top part of the cork surface will now be exposed.
CAUTION: The blade on the foil cutter is sharp. Please keep fingers away from the cutter's sharp
edges.
C. TO OPERATE YOUR WINE OPENER
• Place your bottle of wine on a flat surface and hold the bottle firmly with one hand.
N.B. The Wine Opener can be used to remove natural or synthetic corks.
• Place the Wine Opener on top of the wine bottle making sure that it remains as straight/upright
as possible at all times. If you hold the Wine Opener at an angle to the bottle, it will not remove
the cork properly.
• Hold the Wine Opener firmly and gently push down on the top of the bottle. The corkscrew
will start automatically and will turn in an anticlockwise direction to gradually remove the cork.
When the mechanism has stopped, the cork has been fully removed.
(refer to cover)
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q173a

Table of Contents