Xtreme Power 50115 Owner's Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Xtreme Power Manuals
  4. Saw
  5. 50115
  6. Owner's manual and safety instructions

Xtreme Power 50115 Owner's Manual And Safety Instructions

Circular saw w/laser 4.5” 5.8a
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CIRCULAR SAW W/ LASER 4.5" 5.8A
ITEM: 50115
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50115 and is the answer not in the manual?

Questions and answers

david
March 31, 2025

need laser battery number

0

Subscribe to Our Youtube Channel

Related Manuals for Xtreme Power 50115

Summary of Contents for Xtreme Power 50115

  • Page 1 CIRCULAR SAW W/ LASER 4.5” 5.8A ITEM: 50115 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER) FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST...

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
  • Page 3 IMPORTANT SAFETY INFORMATION If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection.
  • Page 4 IMPORTANT SAFETY INFORMATION When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator; If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.
  • Page 5 IMPORTANT SAFETY INFORMATION Blades must be rated to at least the maximum speed marked on the tool. Maintain labels and nameplates on the tool. These carry important safety information. Avoid unintentional starting. Prepare to begin work before turning on the tool. DO NOT lay the tool down until it has come to a complete stop.

  • Page 6: Product Information

    PRODUCT INFORMATION...

  • Page 7: Operation

    OPERATION ATTACHING/REPLACING THE SAW BLADE: 1. To remove or replace the saw blade (16), you will first need to remove the anchor screw (3) and the outer flange (4). 2. To do this, you will need to hold the spindle lock (9) and use the hex key (13) to loosen the arbor screw (3) (clockwise thread) and outer flange (4).

  • Page 8: Angle Adjustment

    OPERATION ANGLE ADJUSTMENT To adjust the angle of the cut, loosen the Angle Locking Lever (12), then slide to the degree of tilt you require and tighten to secure. IMPORTANT: Once have adjusted angle, ensure have securely re-tightened the Angle Locking Lever (12) before using the tool in order to avoid damage to the tool and injury to the user.

  • Page 9: Operation And Maintenance

    OPERATION AND MAINTENANCE POCKET CUTTING: Set the depth adjustment scale (17) to the desired cutting depth, re-tighten and plug the tool back in. With the saw blade barely above the material to be cut, power up the saw and allow the tool to reach full speed.

  • Page 10: Parts List

    PARTS LIST...
  • Page 11 PARTS LIST...

  • Page 12: Maintenance

    MAINTENANCE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

Table of Contents