Table of Contents
Advertisement
Listening to Radio
Using Buttons on the Remote Control
Press the FUNCTION button to select FM.
1.
Tune in to the desired station.
2.
• Preset Tuning 1 : Press the 5 button to select
PRESET and then press the TUNING UP,
DOWN button to select the preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory. See Presetting Stations below.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING UP,
DOWN button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING
UP, DOWN button to automatically search the
band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
Press the FUNCTION button to select FM.
1.
Press the TUNING UP, DOWN button to select
2.
<89.10>.
3.
Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4.
Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its own.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 4.
5.
• To tune in to a preset station, press the TUNING
UP, DOWN button.
Using the TV Sound Button on the
Remote Control
TV Sound
If you have a TV that supports Anynet+ (HDMI-CEC), the
TV SOUND button lets you direct the TV's audio to the
home cinema speakers or the TV speakers. To use, follow
these steps:
1.
Connect an HDMI cable to the TV and home
cinema. (See page 15.)
2.
Set Anynet+ (HDMI-CEC) On in the home cinema
and TV.
3.
Press the TV SOUND button on the remote control.
TV SOUND ON flashes on the display on the front
panel, and then changes to D. IN.
• When TV SOUND is on, TV audio outputs through
the home cinema speakers.
Press the TV SOUND button again to turn TV
4.
SOUND off.
• When TV SOUND is off, TV audio outputs through
the speakers of the connected Anynet+ TV.
Use TV SOUND:
1) When you want to listen to the TV's audio through
the home cinema speakers.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
cinema speakers.
TV SOUND ON/OFF support specification
Connected TV
Anynet+
(HDMI-CEC)
supported TV
Anynet+
(HDMI-CEC) not
supported TV
You can enjoy various sound mode.
DSPOFF : Select for normal listening.
CINEMA : Reproduces realistic and powerful
sound for movie sources.
MUSIC : Suitable for whole music sources.
GAME : Suited for playing video games and
produces powerful sound.
M-STEREO (Multi Stereo) : Produces surround
TV SOUND
sound for 2 channel input sources.
POWER BASS : Reinforce bass sound effect.
LOUD : Improves bass sound characteristics
according to output level.
NIGHT : Optimizes to night by compress dynamic
range (soft sound).
Anynet+
TV
(HDMI-CEC)
Sound
Setting
ON
ON
O
OFF
O
No operation
O
DSP/EQ
English
TV
Sound
OFF
O
X
X
DSP/EQ
27
|
Advertisement
Table of Contents
