Siemens WT43RVE8DN Installation And Operating Instructions Manual page 35

Table of Contents

Advertisement

Allow the appliance to cool down
Note:
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
Clean the fluff filter.~ Page 29
1.
Open the maintenance flap by the
2.
handle.
Clean the maintenance flap with a
3.
soft, damp cloth.
Unlock the levers on the heat
4.
exchanger cover.
Cleaning and maintenance
Pull the heat exchanger cover out by
5.
its grip.
Carefully remove the filter mat from
6.
the heat exchanger cover.
Take care not to damage the
Note:
filter mat when doing this.
Use a soft brush to clean the heat
7.
exchanger cover.
Make sure that no dirt or
Note:
debris is left on the seal.
Rinse the filter mat under running
8.
water and squeeze out the water
with your hand.
Notes
– If there are heavy deposits, you
can clean the filter mat carefully
with a vacuum cleaner.
– Only clean with clear water; do
not use cleaning products.
en
35

Advertisement

Table of Contents
loading

Table of Contents