BIOS Setup
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at
a minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so the
computer can "wake" on input from the keyboard, clock, modem, LAN, or USB
device.
** Advanced Resume Events Control **
▶ PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
3-18
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status
before power failure or interrupt occurred.