Front Panel Led And Buttons - Gigabyte R282-3C0 User Manual

2-3

Front Panel LED and Buttons

No. Name
1.
Reset Button
2.
NMI button
Power button
3.
with LED
ID Button
4.
with LED
HDD Status
5.
LED
System
6.
Status LED
1
3
5
7
Color Status
Press the button to reset the system.
Press the button server generates a NMI to the processor
if the multiple-bit ECC errors occur, which effectively halt
the server.
Green On System is powered on
•
N/A Off
Blue On System identification is active.
N/A Off System identification is disabled.
On HDD locate
Green
Blink HDD access
Amber On HDD fault
Green/
Blink HDD rebuilding
Amber
N/A Off No HDD access or no HDD fault.
Green On System is operating normally.
Critical condition, may indicates:
On System fan failure
System temperature
Non-critical condition, may indicates:
Amber
Redundant power module failure
Blink
Temperature and voltage issue
Chassis intrusion
Non-critical condition, may indicates:
Redundant power module failure
N/A Off
Temperature and voltage issue
Chassis intrusion
2
4
6
8
L2
L1
Description
System is not powered on or in ACPI S5 state (power
off)
- 21 - Hardware Installation