Seat Height Adjustment; Tray Assembly & Adjustment - Kids Embrace Deluxe High Chair Owner's Manual

Seat Height Adjustment

WARNING:
NEVER adjust the seat height while a child is in the high chair.
After adjusting the seat height, ensure the seat is locked in one of the six
postions before using the high chair.
1. Raising the Seat Height
While holding the handles with your fingers on both sides, depress both
height adjustment buttons simultaneously with thumbs
the desired height postion is met then release buttons shown in Figure 4.
Check to make sure seat is locked into one of the six locked positions.
Lowering the Seat Height
2.
While holding the handles with your fingers on both sides, depress both
height adjustment buttons simultaneously with thumbs
ward on the handles until desired height postion is met then release
buttons shown in Figure 5. Check to make sure seat is locked into one of
the six locked positions.
Lowest Postion
Figure 4
9
and pull up until
1
and push down-
2
Top Postion
2
Figure 5
Tray Assembly & Adjustment
WARNING: DO NOT assemble tray with child in seat. DO NOT lean on tray.
Installing the tray
1.
Pull the handle located under the tray shelf in figure 6, then insert the
1
tubes from the tray assembly into the high chair housing
2
sides shown in figure 6. Slide the tray twards the back of the high chair.
Check the tray is locked in one of the two positions.
Adjusting the tray
2.
The Tray can be adjusted in two positions by pulling the handle
then pulling outward or pushing inward on the tray .
Removing the tray
3.
Pull the handle located under the tray shelf in Figure 6, then pull the tray
1
outward to the outmost position. Press both side buttons
tray safety locks, then slide the tray tubes off the high chair housing
shown in figure 7.
Removing the tray insert
4.
Pull lower tray insert tabs outward
insert tray is unattached from the main tray. To place insert back on main
tray, check that nothing is on main tray that would prevent it from attach-
ing, align the insert to tray and press downward.
3
2
Figure 6
aligning both
1 and
to unlock the
4
5
and then lift tray insert upward until
6
5
4
6
Figure 7 10