Summit CR5B271B Instruction Manual page 8

Page 7
Before making the countertop cutout, check for clearance. See if the cooktop will
clear the front and side walls of the base cabinet. It is also important to provide
enough ventilation.
Adequate ventilation of the space below the countertop must be provided to
ensure proper operation of the cooktop.
bottom pan during operation will overheat an improperly ventilated area.
Allow a 2" (51mm) minimum clearance between the bottom of the metal pan of
the cooktop and any combustible surface located below, e.g., the upper edge of
a drawer installed below the cooktop. Failure to provide proper clearances and
ventilation may result in a fire hazard.
Countertop cutout dimensions are shown in the table below.
Model
CR5B273B/ CR5B274W
CRS5B13B/ CRS5B14W
CR5B271B/ CR5B272W
CRS5B11B/ CRS5B12W
CRD4B1B/ CRD4B2W
CRSD4B17B/ CRSD4B18W
CRD4B3B/ CRD4B4W
CRSD4B15B/ CRSD4B16W
CRD4B7B/ CRD4B8W
CRSD4B111B/ CRSD4B112W
CRD3B1B/ CRD3B2W
CRSD3B27B/ CRSD3B28W
CRD3B5B/ CRD3B6W
CRSD3B21B/ CRSD3B22W
CRD3B3B/ CRD3B4W
CRSD3B23B/ CRSD3B24W
CRL3B3B/ CRL3B4W
CRSL3B29B/ CRSL3B30W
CRL3B1B/ CRL3B2W
CRSL3B31B/ CRSL3B32W
CRL4B1B/ CRL4B2W
CRSL4B37B/ CRSL4B38W
Heat transferred from the cooktop
Cooktop dimensions
27"W x 20.5"D x 2¾"H
24"W x 19.5"D x 2¾"H
24"W x 19.5"D x 2¾"H
36"W x 13"D x 2¾"H
42"W x 13" D x 2¾"H
Note:
countertop, put a radius at the
corners of the cutout (a radius of
¼" is typical). This will keep the
countertop from cracking. Follow
the
instructions
minimum
reinforcement of corners.
Cutout dimensions
24.75"W x 18.75"D with ¼" radius
22.125" W x 18.625"D with ¼" radius
22.125"W x 18.625"D with ¼" radius
34.75"W x 11.75" D with ¼" radius
40.75"W x 11.75"D with ¼" radius
When making
countertop manufacturer's
regarding
corner radius
the
the
and