Orion SkyQuest XX12g Instruction Manual page 5

Box #2: Dobsonian Base (Figure 3)
Qty. Description
1 Left side panel (with altitude motor and encoders pre-
installed)
1 Right side panel
1 Front panel
2 Side braces
1 Baseplate assembly (with azimuth motor and encoders
pre-installed)
6 Base assembly wood screws (coarse thread,
47mm long)
12 Base connecting bolts with hand knobs
12 Rubber retaining washers
12 Spacers for connecting bolts (10mm long, 15mm dia.)
1 Insertion tube for rubber retaining washers (~3" long)
2 Carrying handles
4 Handle mounting bolts (socket head cap screws)
3 Hex keys (2mm, 4mm, 6mm)
3 Plastic feet (XX12g only; feet are pre-installed on
XX14g)
3 Feet wood screws (1" long; XX12g only)
b.
Azimuth motor
connection cable
Coil cable for
hand controller
DC power cable
Mounting bolts
for handles
Handles
Feet (x3) and mounting
Hand RS-232
screws (Feet come
controller cable
pre-installed on XX14g)
1 SynScan AZ hand controller
1 Hand controller cable (coiled)
1 Azimuth motor connection cable
1 RS-232 computer cable
1 DC power cable
Right
side
panel
Side braces
a.
Figure 3.
Contents of the base box.
b)
The hand controller, cables, and other hardware.
Rubber retaining
washers
Base connecting
bolts (x12)
Base
assembly
wood
screws (x6)
Front
Left
panel
side
panel
Baseplate
assembly
a)
The larger components.
Spacers for
connecting
bolts (x12)
Insertion tube
Phillips
screwdriver
Hex keys
5