Advertisement
Quick Links
Advertisement
Related Manuals for Loos & Co Locoloc SL-7NDK-SB
Summary of Contents for Loos & Co Locoloc SL-7NDK-SB
- Page 1 Locoloc ® Swaging Tools SL-7NDK-SB Battery-Powered Hand Swager Operator’s Manual...
-
Page 2: Specifications
SPECIFICATIONS Swages aluminum and copper oval sleeves for 3/32, 1/8, 3/16, and 1/4 sizes wire rope. CRIMPING TOOL Output: 6 ton Weight: 5.9 lbs. w/ battery Size: 15.8”L x 3.3”W x 4.5”H BATTERY CARTRIDGE (BP-185) Battery Type: Lithium Ion Voltage: 18V DC Rated current: 5 Ah... -
Page 3: Standard Accessories
STANDARD ACCESSORIES BATTERY CARTRIDGE BATTERY CHARGER CARRYING CASE www.LoosSeismicBracing.com Toll Free: 800-321-LOOS (5667) - Page 4 OPERATING INSTRUCTIONS CHARGING THE BATTERY 1. Insert the plug end into 120V power source. The LED indicator will be steady green indicating the charger is now in “stand-by” mode and ready to charge the battery. Do not plug the charger into a generator as this will likely cause the fuse in the charger to short, and will not operate.
- Page 5 OPERATING INSTRUCTIONS Ensure that you have read and understand the safety instructions included in this manual before you operate the tool. Check whether the tool is damaged. Before using the tool, always carefully check that parts are functioning correctly. Check that moving parts do not become stuck and are not damaged. Do not use the tool if damaged or defective parts are detected.
- Page 6 OPERATING INSTRUCTIONS 3/32 3/16 #G03 #GR6 #BL8 #OR4 INSERT DIE SET Activate the retract trigger (4) to open jaws of tool. Select proper die to be used and slide both pieces of the die set into jaws of the tool by unscrewing the insert screw (5) on slide of jaw, then slide die into place and retighten.
- Page 7 ↑ ↑ #GO3-CBL #GR6-CBL Finished sleeve should look like this. Be sure sleeves have been compressed the proper number of times. (See number of compressions Figure 1) Use the swaging gauge provided with the tool to check proper after swage diameter of sleeve.
-
Page 8: Important Operating Precautions
IMPORTANT OPERATING PRECAUTIONS PRECAUTIONS FOR THE TOOL 1. Select appropriate dies for the connector to be compressed. Incorrect combinations result in inferior connections of the conductors. Consult your connector manufacturer for the recommended die/connector combinations. 2. Always point the tool away from other people. 3. -
Page 9: Warranty
WARRANTY Huskie Tools products carry a warranty that makes us a leader in the tool industry. No other manufacturer dares to back its tools as we do. PRODUCT WARRANTY REC-Series battery-operated products 5 Years IL-7ND 3 Years ECO-Series products 1 Year Power Tools 3 Years Batteries (BP-185) - Page 10 WARRANTY Huskie reserves the right to determine all warranty claims. Huskie will not waranty tools containing parts or batteries not originally supplied by Hus- kie. Failure due to misuse, improper maintenance, misapplication, not fol- lowing instructions or warnings, abuse or repairs attempted by anyone other than Huskie Tools, Inc.
- Page 11 WARRANTY Complete Support Services Our customers have direct access to us for training, service, and problem solving. As specialists in tools, we maintain a trained repair staff and a large stock of parts. This contrasts with many tool suppliers who carry tools as a sideline without offering support services.
- Page 12 901 Industrial Blvd • Naples, FL 34104 Tel: (239) 643-LOOS • Fax (239) 643-4558 E-mail: sales@loosnaples.com • Website: www.loosseismicbrac ng.com INST-41 Rev. 7.11.19...