Blake UK Proception PROHDMIEX50M Manual

PROHDMIEX50M
50m HDMI Extender over CAT5e/6 with IR,
PoE, EDID and Distance Equalization
The HDMI extender over single CAT5e/6 with IR extends high definition video and audio signals up
to 164ft/50m. Features EDID management, which allows and encourages source and display
"handshake" for seamless integration. The extender is equipped with bi-directional IR
pass-through which allows for remote control at both TVs.
Package Contents:
• HDMI transmitter.
• HDMI receiver.
• 5V 1A DC power supply.
• Product manual.
Features:
• Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable.
• Support copy EDID from receiver display or loop out display.
• Allows for cascading via additional HDMI loop out port.
• Support Power over cable function.
• Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or
Cat6 cable.
• Works with HDMI and HDCP compliant devices.
• Supports up to 1080p High Definition resolution.
Transmitting unit:
① HDMI in: Connect the HDMI output port of your source equipment such as DVD/Blu-ray players
or Set-Top-Box with an HDMI cable.
② EDID: The switcher can switch copy EDID function, switch to the right and the extender will
copy HDMI loop out display EDID information to source. Switch to the left and the extender will
copy Receiver display EDID to source.
③ HDMI out: Connect the HDMI input of your display (such as an HDTV).
④ IR out: Connect the IR Blaster cable included in the package for IR signal transmission. Place
the IR blaster in direct line-of-sight of the equipment to be controlled.
⑤ Power LED.
⑥ CAT: CAT5e/6 cable connection.
⑦ Link LED: This LED will illuminate when the device is connected to HDMI source.
⑧ DC 5V: 5V DC power supply connection.
Receiver unit:
sales@blake-uk.com
www.blake-uk.com
0114 223 5000
PD2011-8765-05
1