Makita M9003 Instruction Manual
Hide thumbs
Also See for M9003:
- Instruction manual (93 pages) ,
- Instruction manual (60 pages) ,
- Instruction manual (12 pages)
Related Manuals for Makita M9003
Summary of Contents for Makita M9003
- Page 1 INSTRUCTION MANUAL Angle Grinder M9002 M9003 015065 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model M9002 M9003 Depressed center wheel diameter 125 mm 150 mm Max. wheel thickness 6 mm Spindle thread M14 or 5/8" (country specific) Rated speed (n) / No load speed (n 11,000 min 10,000 min Overall length... -
Page 3: Grinder Safety Warnings
Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 18. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord. - Page 4 Operations such as sanding, wire brushing, 10. Hold the power tool by insulated gripping polishing or cutting-off are not recommended to surfaces only, when performing an operation be performed with this power tool. Operations for where the cutting accessory may contact which the power tool was not designed may create a hidden wiring or its own cord.
- Page 5 b) Never place your hand near the rotating 19. Be careful not to damage the spindle, the accessory. Accessory may kickback over your hand. flange (especially the installing surface) or the c) Do not position your body in the area where lock nut.
-
Page 6: Functional Description
To stop the tool from the locked position, pull the switch FUNCTIONAL DESCRIPTION trigger fully, and then release it. ASSEMBLY CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function CAUTION: on the tool. Always be sure that the tool is switched off and •... -
Page 7: Operation
Installing or removing depressed center CAUTION: grinding wheel/Multi-disc Never switch on the tool when it is in contact with • the workpiece, it may cause an injury to operator. (optional accessory) Always wear safety goggles or a face shield during •... - Page 8 Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
- Page 12 Makita Corporation www.makita.com 885412-6...