Advertisement
MAMMOTH 4FT DISPLAY (BACKLIT)
MAMMOTH MODULAR DISPLAY
PRODUCT CODE: MAM4X8LBF
1. Attach Split Connectors to Side Extrusions:
a. Slide the Split Connectors into the grooves
of the frame and tighten
2. Attach Corner Connectors:
a. Insert the Corner Connector
locks into the ends of the frame.
Page 1 of 2
SET UP INSTRUCTIONS
2
1
3
2
b. Attach other extrusion onto the Split Connector.
b. Then attach side extrusion onto
the Corner Connector. Tighten screws
with included 5mm allen wrench.
2
1
3
2
3. Install Feet:
a. Line up the holes on feet with holes
on the bottom horizontal frame piece.
c. Tighten screws with included 5mm allen
wrench.
b. Insert screws and washers into
hole to secure feet to frame.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mammoth MAM4X8LBF
Summary of Contents for Mammoth MAM4X8LBF
- Page 1 MAMMOTH 4FT DISPLAY (BACKLIT) MAMMOTH MODULAR DISPLAY PRODUCT CODE: MAM4X8LBF SET UP INSTRUCTIONS 1. Attach Split Connectors to Side Extrusions: a. Slide the Split Connectors into the grooves b. Attach other extrusion onto the Split Connector. c. Tighten screws with included 5mm allen of the frame and tighten wrench.
- Page 2 MAMMOTH 4FT DISPLAY (BACKLIT) MAMMOTH MODULAR DISPLAY PRODUCT CODE: MAM4X8LBF SET UP INSTRUCTIONS 4. Install Edge Lights: a. Install six edge lights (12 total) on each b. Position light strip into inside groove of frame. c. Then twist screw knobs clockwise to lock edge lights into place.
Need help?
Do you have a question about the MAM4X8LBF and is the answer not in the manual?
Questions and answers