Assembly (continued)
5
Assembling the door
□ Attach Door Knob (M) to Door Panel (J) using one (1)
M6*25 mm bolts (EE).
Please fully tighten all bolts at this time.
Orient the unit so that Table Top with Burner (G) is facing up.
□
Attach Door Panel (J) to Front Leg A (A) using one (1)
□
M6*20 mm bolt (FF), tighten the bolt using Wrench (GG).
6
Assembling the cylinder
□ Put the cylinder into the Gas Tank Support (K), and
secure the cyliner by tightening the screw in the
gas tank support. Connect the hose and regulator
to the cylinder.
NOTE: The propane cylinder is sold separately.
Use a standard 20 lb. propane cylinder only.
Put the hose away from the bowl base during
connect the propane cylinder.
FF
9
EE
M
J
J