Connecting To A Computer - Philips 5700 Series User Manual

c Antenna/cable TV
Input for an antenna, cable or satellite signal
d USB
Data input from a USB storage device.
e Headphones q
Stereo sound output for headphones.
If you want to use headphone only , please
turn off TV Speakers in advance.
Press (Home) > [Sound] > [TV
Speakers] > [off].
Note
•
Headphones can only be used as a low-power audio
output. Do not connect high-power active devices
(such as high-power active speakers).

Connecting to a computer

Before connecting a computer to the TV:
• Set the computer screen refresh rate to
60 Hz.
• Select a supported screen resolution on
the computer.
Connect to the computer using one of the
following connections:
Note
•
A separate audio cable is required when connecting
via DVI.
• HDMI cable
1
Set the resolution of the computer display
to 480p/576p/720p/1080p
2
(Home) and select [Setting] to
Press
enter the [Setting] menu.
3
to select [Settings] >
Press
[HDMI Mode], and set the HDMI display
mode to graphics or video.
4
Adjust the picture format to achieve the
best display results.
(Home) and select [Setting]
• Press
to enter the [Setting] menu.
• Press
[Picture Format].
• Select a picture format.
• Press OK to confirm.
to select [Settings] >
EN
19