Philips 32BDL4050D Manual page 62

Mode 3
DC OFF:
Backlight Off only
Power Save:
Backlight Ooff only
Mode 4
DC OFF:
Backlight Off only
Power Save:
No signal(Backlight On)
Following table is the action for Android board with different power
mode.
DC off/on: Press power button by RC
Power mode in OSD Mode 1/2
DC off shutdown
2. Android system will
go to the default black
launcher.
DC on Boot up
Scalar FW Update
Update scalar FW by USB.
Auto FW Update
Setup Android FW auto background update time.
* Note: When Auto FW update is not OFF, display will work under
Mode3 for FW update, but OSD item will not change.
USB cloning
Copy PD settings from one set to another.
Import: Copy settings from file to display
Export: Copy PD settings into file.
* Cloned data stores in android internal storage. User need to use APK
to copy cloned data to another display.
Advanced option reset
Reset all settings except {Date and Time} in the Advanced option menu
to factory preset values.
1. Press [OK] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [OK]
button to restore settings to factory preset values.
3. Press the [ ] button or select {Cancel} and press the [OK]
button to cancel and then return to the previous menu.
Mode 1(default)
DC OFF:
Power Off
Power Save:
Power Off
Mode 2
DC OFF:
Power Off
Power Save:
Power Saving
Mode 3/4
1. The current source APK(such
as MediaPlayer, Browser, PDF,
SmartCMS or Custom) will be
closed.
1. Android system reboots
49
32BDL4050D