Advertisement
device, please use the specified accessories provided or recommended by the original
manufacturer.
4. The device should not be placed in wet environment or near water, nor should
they be directly exposed to sunlight.
5. Do not place the device near a strong heat source, because this may affect the life
and normal use of the device.
6. Please restrain from using the device on eyes, thyroid, parathyroid, testicles,
abdomen of pregnant women, and pacemakers.
7. Patients who are suffering from illness should consult with a doctor and gain
permission from the doctor before using.
8. Please turn off the power switch of the device, and ensure that the total power
supply of the device is turned off before the staff leaves after daily use, so as to
ensure the safety of the electrical products.
9. Use device or train device operators in strict accordance with instructions in the
user manual.
10. When taking other weight-loss drugs, it is recommended to stop taking them for
1 to 2 months before treatment. Extension of the course of treatment is
recommended if you wish to lose weight immediately.
11. Don't use the instrument with an empty stomach. After a full meal, wait at least 1
hour before a course of weight loss treatment.
12. Start from the lowest energy level and slowly add up.
13. When using this device, the operating parts must be kept moist and dry skin
should be avoided.
14. Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene and prolong its service life.
15. When operating, the RF probe should fully touch the skin to avoid uneven heat.
16. Turn off the device before unplugging.
17. Apply gel evenly on the treatment area when operating on the body.
18. Wait for 3 months after any plastic surgeries or 1 month before any plastic
surgeries.
19. Make sure the entire surface of the probe is in full contact with the skin during
40K, face RF and eye RF treatment.
5. Troubleshooting & Solutions
1. The instrument can't start and the key lamp on the back of the instrument doesn't
work?
A. Ensure that the power cord is connected to a working power outlet.
B. Ensure the fuse tube on the back of the instrument is not loose or being burnt.
2. No energy output of the instrument?
A. Please check whether the plug connecting the instrument handle and the body is
tightly connected.
Advertisement
