Pioneer DMH-G225BT Operation Manual page 30

[Beep Tone]
Menu Item
[Beep Tone]
[On] [Off]
[Touch panel calibration]
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
• Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
• Do not turn off the engine while saving the adjusted position data.
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
Menu Item
[Touch panel calibration]
[Dimmer Settings]
Menu Item
[Dimmer Trigger]
[Auto]
[Manual]
[Time]
Description
Select [Off] to disable the beep sound when the button is
pressed or the screen is touched.
Description
1
Touch [Yes].
2
Touch four corners of the screen along the arrows.
3
Press .
The adjustment results are saved.
4
Press once again.
Proceed to 16-point adjustment.
5
Gently touch the centre of the [+] mark displayed on
the screen.
The target indicates the order.
• When you press
position returns.
• When you press and hold
cancelled.
6
Press and hold
The adjustment results are saved.
Description
Setting the dimmer brightness.
Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
Switches the dimmer to on or off manually.
Switches the dimmer to on or off at the time you adjusted.
- 30 -
, the previous adjustment
, the adjustment is
.