Zte Blade V30 Vita Quick Start Manual page 7

Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientific
organization ICNIRP and include safety
margins designed to assure the protection of
all persons, regardless of age and health.
The guidelines use a unit of measurement
known as Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg and
the highest SAR value for this device when
tested at the head was 0.377 W/kg*, and when
tested at the body was 1.195 W/kg* with 5 mm
distance. As mobile devices offer a range of
functions, they can be used in other positions,
such as on the body as described in the user
manual**.
As SAR is measured utilizing the device's
highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device
to ensure it only uses the minimum power
required to communicate with the network.
* The tests are carried out in accordance with
EN 50360, EN 50566, EN 50663, EN 62209-1
and EN 62209-2.
** Please see body worn operation in the user
manual.
11
Specification
GSM900/1800
WCDMA Band 1,8
FDD LTE Band 1,3,7,8,20,28
TDD LTE Band 38,40
EUT tested
802.11b/g/n
radios
Bluetooth V4.2+EDR/LE
application
GPS
NFC
WCDMA Version Rel.9
LTE Version Rel.12
GSM900: 33 dBm
GSM1800: 29.8 dBm
WCDMA Band 1: 24 dBm
WCDMA Band 8: 24.1 dBm
FDD LTE Band 1: 23.7 dBm
FDD LTE Band 3: 23.8 dBm
FDD LTE Band 7: 23.3 dBm
FDD LTE Band 8: 23.9 dBm
Maximum RF
FDD LTE Band 20: 24 dBm
output power
FDD LTE Band 28: 24.1 dBm
TDD LTE Band 38: 24 dBm
TDD LTE Band 40: 24.2 dBm
802.11b/g/n: 18/17/16 dBm
Bluetooth EDR: 6 dBm
Bluetooth LE: 6 dBm
GPS(RX Only)
NFC(RX Only)
12