Epson Stylus Color 600 Quick Setup Manual page 10

Note:
If you're setting up your
computer for the first time,
you may see a message
asking if you want to install a
printer. Select Cancel and
then complete your
Windows 95 setup. You will
be prompted to restart
Windows. If you then see the
New Hardware Found screen,
follow the instructions under
"Windows 95 Plug and Play"
to install your printer software.
If you don't see the New
Hardware Found screen, follow
the instructions under "While
Running Windows 95" on
page 10.
If your computer is on a
network and you connected
the printer to a remote server,
you need to set up the printer
for network use after installing
the printer software. See
Chapter 4 of your User's
Guide for instructions.
While Running Windows 95
1. Make sure Windows 95 is running and the printer is on.
Exit any open applications.
2. Insert the EPSON printer software CD-ROM (or diskette 1)
in your drive.
3. If Windows 95 launches the install program automatically,
you see the EPSON Setup CD window click Next. At the
next screen, click the Install icon.
If it doesn't launch automatically, double-click the My
Computer icon; then double-click your CD-ROM drive
icon. You see the EPSON Setup CD window. Click Next.
At the next screen, click the Install icon.
(If you're using diskettes, double-click your diskette drive
icon and click the Setup icon.)
4. Select Epson Stylus COLOR 600 in the printer Model Tab
and click OK. Follow the instructions on the screen to
install the software.
The installer creates an EPSON folder for your printer software
icons and adds an icon for your printer to the Printers folder.
If you installed your software from the CD-ROM, EPSON
Answers opens automatically.
After running EPSON Answers, click the EPSON Look Your
Best Color Pak icon in the EPSON folder to install your
creative software and check out the extras.
To run EPSON Answers, click its icon in the EPSON folder.
10