WIRELESS DOOR SENSOR INSTALLATION GUIDE
Read instructions carefully before beginning
Please make sure your garage door is closed before you start installation.
The GoGogate product and our wireless door sensors are meant to be used with garage
door openers equiped with photo-eye safety sensors (manufactured after 1993). These
sensors are normally found at the bottom of your garage door and avoid accidental closing
of your garage door if an object or person is on the path of the door.
Step 1
BACK VIEW
BACK VIEW
Open the sensor's batteries' compartment
to include the provided AAA batteries (x2).
Place the batteries as per picture indications.
Finally, close the compartment.
Step 3
Attach your wireless sensors to your garage door as per drawing below.
Place the sensors on the upper part of your garage door wall.
27 mm width
FRONT VIEW
Note: write down and store in
a safe location the 4 digit code
located on the front of your sensor.
Main sensor's features:
•
•
•
•
•
•
•
70 mm
Lenght
24 mm
Height
TO PREVENT SERIOUS INJURY OR DEATH FROM
MOVING GARAGE DOORS OR GATES:
- DO NOT let children use the GOGOGATE product and app without adult supervision.
- ONLY Operate your GOGOGATE device when you are in clear view of your garage
or gate and you have verified that there are no objects obstructing the operation of
the door. ALWAYS wait for garage door or gate to be completely closed.
- NEVER operate the remote access feature of your GoGoGate without ensuring that
there is an adult physically present in front of the door or gate validating that it is safe
to start the remote operation of your device
Step 2
SIDE VIEW
Make sure you place the sensor
with the "TOP" label facing
the garage door ceiling.
PLACE THE SENSOR IN THE UPPER PART OF YOUR GARAGE WITH
RED LED LIGHT FACING DOWN. (LEFT OR RIGHT SIDE)
Remotely monitor if garage door is open or closed
Check garage door temperature in ºC/ºF
Receive real time alerts on your Smartphone
Easy to install tilt sensor with double sided tapes
Tilt switch broken when garage door opens.
Monitor sensor's battery status for prompt replacement
Keep track of all garage door events in a built-in calendar of events
SPECS
Frequency
Range
Operating Temperature
Battery type
Battery life span
Packaging
Certification
BACK VIEW
Place on the wall
with the double-sided
fastening strip.
GGG2-TWS-001
2.4 Ghz
50 m or 150 ft (open space)
Between -10ºC and 70ºC
AAA (x2)
1.5 years
Clamshell
CE - FCC
Need help?
Do you have a question about the GGG2-TWS-001 and is the answer not in the manual?
Questions and answers