ETEKCITY EDT-1USA Quick Start Manual

Digital Timer Outlet
Model No.: EDT-1USA
QUICK START GUIDE

1. First Time Set Up

2. Setting Up the Clock

Questions or Concerns? (855) 686-3835 • support@etekcity.com
1
First Time Set Up
Plug in the timer outlet to a powered
electrical socket, and press the reset
button (R). The screen will turn blank,
then will show the reset display.
All manuals and user guides at all-guides.com
3. How to Program a Timer
Setting Up the Clock
2
NOTE: The default setting for the clock is 24-hour time
1. Press and hold for 2 seconds until the hour digit starts to flash.
2. Once the hour digit starts flashing, press
or to select the hour.
3. Press , and the minute digits will start to
flash. Press or to select the desired
minutes.
4. Press a second time, and the days at
the top of the display will start to flash. Use
or to select the desired day.
5. Press a third time, and the hour and
minute digits will start to flash simultaneously.
Press or until the "AM" or "PM"
symbol appears on the display; this indicates that
the clock is on 12-hour time.
NOTE: If the "AM" or "PM' symbol disappears, then the clock is on 24-hour time.
6. Press when you have finished setting up the clock.
Daylight Savings Clock & How to Program a Timer.)
(See next page on how to set up the