Advertisement
Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England
Model UT5969 Pistol Reversible Screwdriver, Serial Number
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 7, Pneurop PN8NTC1
following the provisions of
Lane End
Place and date of issue
adjusting or removing the working attachment.
13) Check hose and fittings regularly for wear. Replace if
necessary. Do not carry the tool by its hose and ensure the hand
is remote from the on/off control when carrying the tool with the
air supply connected.
14) Take care against entanglement of moving parts of the tool
with clothing, ties, hair, cleaning rags, etc. This will cause the
body to be drawn towards the tool and can be very dangerous.
15) It is expected that users will adopt safe working practices
and observe all relevant legal requirements when installing, using
or maintaining the tool.
16) Do not install the tool unless an easily accessible and easily
operable on/off valve is incorporated in the air supply.
17) Take care that the tool exhaust air does not cause a problem
or blows on another person.
18) Never lay a tool down unless the working attachment has
stopped moving.
19) Always ensure that the reverse button is in the selected
position before starting the tool.
20) Do not use bits or sockets with excessive wear to the input
and output drives. Make sure the bit, socket, extension is firmly
fixed to the tool.
21) When loosening fasteners first ensure that there is sufficient
clearance behind the tool to avoid hand entrapment. The tool will
move away from the threaded joint as the nut/bolt is loosened
and rides up the thread moving the tool with it.
Accessories
© Copyright of Universal Air Tool Company Limited, established in the United Kingdom, 1994
This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited
Designed & Written in the U.K.
Declaration of Conformity
Universal Air Tool Company Limited
declare under our sole responsibility that the product
89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives
D.H.Moppett (Man. Director)
Name and signature or equivalent marking of authorised person
Notes
Distributor
Page No 4
Advertisement
