Milwaukee M12 JSSP User Manual page 6

TECHNICAL DATA
Battery voltage
Music power
Weight without packing and battery
USB output
Sound quality AUX. Input
Bluetooth input
Transmission range min.
Runtime (4.0Ah)
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SPEAKER SAFETY WARNINGS
Never disassemble or modify this apparatus in any way.
Do not use this apparatus near water.
Clean only with dry cloth. Certain cleaning agents and solvents
are harmful to plastics and other insulated parts. Keep the
apparatus handle clean, dry and free of oil or grease.
Refer all servicing to qualified service personnel.
Do not install near any heat sources.
No flame sources, such as lighted candles, should be placed
on the apparatus.
It shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on
the apparatus.
Do not dispose of used battery packs in the household refuse
or by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System M12 chargers for charging System M12
battery packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in
dry rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case of
eye contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
This appliance is not intended to be used or cleaned by
persons with reduced physical, sensory or mental capabilities,
or lack of experience or knowledge, unless they have been
given instructions concerning the safe use of the appliance by
a person legally responsible for their safety. They should be
supervised while using the appliance. Children shall not use,
clean or play with this appliance, which when not in use should
be secured out of their reach.
SPECIFIED CONDITIONS OF USE
The Bluetooth speaker can play back audio signals from
connected audio devices.
Via USB connection the speaker can charge USB devices.
Do not use this product in any other way as stated for normal
6 English
M12 JSSP use.
USB PORT
12 V
5 W
Devices connected to the USB port are supplied with power.
0.49 kg
Any device that uses more than 2,1 A of DC electrical current
5.0 V/2.1 A will trip a self-resetting function and disable the output.
35 Hz - 20 kHz
POWER BUTTON / BLUETOOTH BUTTON
55 Hz - 16 kHz
10 m
Power on:
25 h
Press the
LED turns on.
USB powers on.
Fuel gauge illuminates to show current battery level for 3
seconds.
Bluetooth enters connecting mode and searches for last paired
device.
Power off:
Press the
LED turns off.
USB powers off.
Speaker powers off.
Bluetooth pairing:
Press and hold the
fl ash to indicate speaker is in pairing mode.
Select "M12 Speaker" on the Bluetooth capable device
- Speaker plays connected tone.
- LED light stays illuminated.
Bluetooth connecting:
When device is turned on and no AUX cable is plugged in.
Speaker will default to Bluetooth mode and begin connecting.
LED will fl ash.
When speaker locates bluetooth device:
- Speaker plays connected tone.
- LED stays illuminated.
Loss of Bluetooth connection:
If connection between speaker and bluetooth device is lost,
speaker will immediatly try to reconnect to bluetooth device.
The LED will fl ash
Bluetooth connecting to a different device:
Press and hold the
fl ashes. It will then be in pair mode and can be connected to a
different device.
VOLUME BUTTON + / -
Volume increase - press button +.
Volume decrease - press button -.
AUX IN
When 3.5 mm AUX cable is plugged in speaker input will
automactically switch to Aux in. When AUX cable is unplugged
speaker will change back to Bluetooth mode. LED indicator
light remains on.
6
/ button.
/ button.
/ button for 3 seconds. LED light will
/ button for 3 seconds until the LED
/